class
ModularSeamAnalyzer
Properties
Property | Description |
---|---|
IsTranslationIndependent | If the modular seams are translation independent the assets don't have to align position wise next to each other. The modular seam will be identical even if the asset has been translated. This setting can only be changed before geometries have been added to the analyzer. |
Name | The name of the ModularSeamAnalyzer object. (Inherited from Object) |
Tolerance | Tolerance should be a small value in relation to the scene. If the distance between coordinates is less than the Tolerance the coordinates are considered to be equal. |
Methods
Method | Description |
---|---|
AddGeometry | Add a modular part geometry that will be analyzed later. |
AddObserver | Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object) |
Analyze | All the geometries that have been added with AddGeometry() will have their shared modular seams grouped together and analyzed. The ModularSeams structure is generated and can then be fetched with GetModularSeams(). |
GetAutomaticModularSeamDetectionType | Get the EAutomaticModularSeamDetectionType. |
GetClass | Get the name of the ModularSeamAnalyzer class. (Inherited from Object) |
GetManualModularSeamDetectionType | Get the EManualModularSeamDetectionType. |
GetManualSeamArray | Get a bool array where the user can manually enter which edges should be modular seams. |
GetManualSeamIdArray | Get a rid array where the user can manually enter the manual modular seam id per edge. |
GetModularSeamDetectionType | Get the EModularSeamDetectionType. |
GetModularSeams | Fetch the modular seam structure that was created from the geometries that had been added and analyzed. The modular seam structure contains the identified modular seams and how they should be reduced based on the geometries that were analyzed. |
IsA | Returns true if ModularSeamAnalyzer is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
IsNull | Returns true if the ModularSeamAnalyzer object is invalid. (Inherited from Object) |
IsSameObjectAs | Returns true if the ModularSeamAnalyzer object is valid. (Inherited from Object) |
NonNull | Returns true if the ModularSeamAnalyzer object is valid. (Inherited from Object) |
PrintInfo | Prints the content/info of the ModularSeamAnalyzer object to the log. (Inherited from Object) |
RemoveObserver | Removes a previously added observer object. (Inherited from Object) |
SetAutomaticModularSeamDetectionType | Set EAutomaticModularSeamDetectionType to either GeometryBorders or OnlyClosed. |
SetManualModularSeamDetectionType | Set EManualModularSeamDetectionType to either SeamIdPerEdge or TogglePerEdge. |
SetModularSeamDetectionType | Set EModularSeamDetectionType to either Automatic, Manual or AutomaticAndManual. |
Static methods
Method | Description |
---|---|
IsClassA | Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
SafeCast | SafeCast makes sure the input object is of a class that can be cast into spModularSeamAnalyzer, and if this is the case, returns the object cast into spModularSeamAnalyzer. (Inherited from Object) |
Properties details
IsTranslationIndependent
If the modular seams are translation independent the assets don't have to align position wise next to each other. The modular seam will be identical even if the asset has been translated. This setting can only be changed before geometries have been added to the analyzer.
Name
The name of the ModularSeamAnalyzer object. (Inherited from Object)
Tolerance
Tolerance should be a small value in relation to the scene. If the distance between coordinates is less than the Tolerance the coordinates are considered to be equal.
Methods details
AddGeometry
Add a modular part geometry that will be analyzed later.
AddObserver
Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
Analyze
All the geometries that have been added with AddGeometry() will have their shared modular seams grouped together and analyzed. The ModularSeams structure is generated and can then be fetched with GetModularSeams().
GetAutomaticModularSeamDetectionType
Get the EAutomaticModularSeamDetectionType.
GetClass
Get the name of the ModularSeamAnalyzer class. (Inherited from Object)
GetManualModularSeamDetectionType
Get the EManualModularSeamDetectionType.
GetManualSeamArray
Get a bool array where the user can manually enter which edges should be modular seams.
GetManualSeamIdArray
Get a rid array where the user can manually enter the manual modular seam id per edge.
GetModularSeamDetectionType
Get the EModularSeamDetectionType.
GetModularSeams
Fetch the modular seam structure that was created from the geometries that had been added and analyzed. The modular seam structure contains the identified modular seams and how they should be reduced based on the geometries that were analyzed.
IsA
Returns true if ModularSeamAnalyzer is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNull
Returns true if the ModularSeamAnalyzer object is invalid. (Inherited from Object)
IsSameObjectAs
Returns true if the ModularSeamAnalyzer object is valid. (Inherited from Object)
NonNull
Returns true if the ModularSeamAnalyzer object is valid. (Inherited from Object)
PrintInfo
Prints the content/info of the ModularSeamAnalyzer object to the log. (Inherited from Object)
RemoveObserver
Removes a previously added observer object. (Inherited from Object)
SetAutomaticModularSeamDetectionType
Set EAutomaticModularSeamDetectionType to either GeometryBorders or OnlyClosed.
SetManualModularSeamDetectionType
Set EManualModularSeamDetectionType to either SeamIdPerEdge or TogglePerEdge.
SetModularSeamDetectionType
Set EModularSeamDetectionType to either Automatic, Manual or AutomaticAndManual.
Static methods details
IsClassA
Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCast
SafeCast makes sure the input object is of a class that can be cast into spModularSeamAnalyzer, and if this is the case, returns the object cast into spModularSeamAnalyzer. (Inherited from Object)