Skip to content
On this page

class RepairSettings

Settings for handling unconnected parts and unwanted gaps in the geometry. It consists of two parts, Welding and T-junction removal. Welding merges vertices that are closer than a set distance from each other. T-junction removal finds open edges that lies within a set distance from other open edges, but without matching vertices. It then splits those triangles into smaller, matching triangles and fuses them together.

Properties

PropertyDescription
NameThe name of the RepairSettings object. (Inherited from Object)
ProgressivePassesThe number of progressive passes. Minimum is 1, but higher numbers give a better quality, at the expense of longer running time.
TJuncDistThe T-Junction distance, below which, the T-Junctions will be welded.
UseTJunctionRemoverIf set, t-junctions will be removed. If enabled, it also requires UseWelding to be on.
UseWeldingIf set, vertices within each others welding distance will be welded together.
WeldDistThe welding distance below which the vertices will be welded.
WeldOnlyBetweenSceneNodesIf set, only vertices that belong to different scene nodes are considered for the welding. Affects both welder and t-junction remover.
WeldOnlyBorderVerticesIf set, only vertices that are on the border (as reported by the VertexBorder boolean field) are considered for the welding.
WeldOnlyWithinMaterialIf set, only vertices that are within the same material are welded. Vertices on material borders are locked.
WeldOnlyWithinSceneNodeIf set, only vertices that are within the same scene node are welded.

Methods

MethodDescription
AddObserverAdds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
GetBoolParameterGet a named parameter boolean value. (Inherited from SettingsObject)
GetClassGet the name of the RepairSettings class. (Inherited from Object)
GetDoubleParameterGet a named parameter floating point value. (Inherited from SettingsObject)
GetErrorStringReturns a string describing the error that was found the last time ValidateSettings was performed. (Inherited from SettingsObject)
GetIntParameterGet a named parameter integer value. (Inherited from SettingsObject)
GetStringParameterGet a named parameter string value. (Inherited from SettingsObject)
GetUIntParameterGet a named parameter unsigned integer value. (Inherited from SettingsObject)
IsAReturns true if RepairSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNullReturns true if the RepairSettings object is invalid. (Inherited from Object)
IsSameObjectAsReturns true if the RepairSettings object is valid. (Inherited from Object)
NonNullReturns true if the RepairSettings object is valid. (Inherited from Object)
PrintInfoPrints the content/info of the RepairSettings object to the log. (Inherited from Object)
RemoveObserverRemoves a previously added observer object. (Inherited from Object)
SetBoolParameterSet a named parameter boolean value. (Inherited from SettingsObject)
SetDoubleParameterSet a named parameter floating point value. (Inherited from SettingsObject)
SetIntParameterSet a named parameter integer value. (Inherited from SettingsObject)
SetStringParameterSet a named parameter string value. (Inherited from SettingsObject)
SetUIntParameterSet a named parameter unsigned integer value. (Inherited from SettingsObject)
SetValidateParameterNamesSet if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled. (Inherited from SettingsObject)
ToJSONGet settings as JSON for debugging purposes. (Inherited from SettingsObject)
ValidateSettingsValidates the current settings values. (Inherited from SettingsObject)

Static methods

MethodDescription
IsClassAReturns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCastSafeCast makes sure the input object is of a class that can be cast into spRepairSettings, and if this is the case, returns the object cast into spRepairSettings. (Inherited from Object)

Properties details

Name

The name of the RepairSettings object. (Inherited from Object)

ProgressivePasses

The number of progressive passes. Minimum is 1, but higher numbers give a better quality, at the expense of longer running time.

TJuncDist

The T-Junction distance, below which, the T-Junctions will be welded.

UseTJunctionRemover

If set, t-junctions will be removed. If enabled, it also requires UseWelding to be on.

UseWelding

If set, vertices within each others welding distance will be welded together.

WeldDist

The welding distance below which the vertices will be welded.

WeldOnlyBetweenSceneNodes

If set, only vertices that belong to different scene nodes are considered for the welding. Affects both welder and t-junction remover.

WeldOnlyBorderVertices

If set, only vertices that are on the border (as reported by the VertexBorder boolean field) are considered for the welding.

WeldOnlyWithinMaterial

If set, only vertices that are within the same material are welded. Vertices on material borders are locked.

WeldOnlyWithinSceneNode

If set, only vertices that are within the same scene node are welded.

Methods details

AddObserver

Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)

GetBoolParameter

Get a named parameter boolean value.

GetClass

Get the name of the RepairSettings class. (Inherited from Object)

GetDoubleParameter

Get a named parameter floating point value.

GetErrorString

Returns a string describing the error that was found the last time ValidateSettings was performed.

GetIntParameter

Get a named parameter integer value.

GetStringParameter

Get a named parameter string value.

GetUIntParameter

Get a named parameter unsigned integer value.

IsA

Returns true if RepairSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)

IsNull

Returns true if the RepairSettings object is invalid. (Inherited from Object)

IsSameObjectAs

Returns true if the RepairSettings object is valid. (Inherited from Object)

NonNull

Returns true if the RepairSettings object is valid. (Inherited from Object)

PrintInfo

Prints the content/info of the RepairSettings object to the log. (Inherited from Object)

RemoveObserver

Removes a previously added observer object. (Inherited from Object)

SetBoolParameter

Set a named parameter boolean value.

SetDoubleParameter

Set a named parameter floating point value.

SetIntParameter

Set a named parameter integer value.

SetStringParameter

Set a named parameter string value.

SetUIntParameter

Set a named parameter unsigned integer value.

SetValidateParameterNames

Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled.

ToJSON

Get settings as JSON for debugging purposes.

ValidateSettings

Validates the current settings values.

Static methods details

IsClassA

Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)

SafeCast

SafeCast makes sure the input object is of a class that can be cast into spRepairSettings, and if this is the case, returns the object cast into spRepairSettings. (Inherited from Object)