`class` NormalRepairer

Repairs normals on a processed geometry.

Properties

Property	Description
FlipFacesAndNormals	Set/Get setting for whether and how to flip the faces and or normals in the scene. None - Don't flip Automatic - Automatically detect and fix backfaces per part MakeDoubleSided - Append inverted winded triangles with inverted normals to the geometry InvertFaces - Invert the winding of the triangles InvertNormals - Invert the vertex normals InvertFacesAndNormals - Invert winding of all triangles and vertex normals.
Geometry	The Geometry object.
HardEdgeAngle	The edge angle in degrees above which an edge is considered "hard".
Name	The name of the NormalRepairer object. (Inherited from Object)
ProcessSelectionSetID	The ID of the SelectionSet containing the meshes to process If the ID is -1, all meshes are selected.
ProcessSelectionSetName	Which selection set should be processed. If SetName is not found, all geometries in the scene will be processed. If both selection set name and ID are set, the name will be used.
RecalculateNormals	Set/Get whether to recalculate new normals.
RepairOnlyInvalidNormals	The RepairOnlyInvalidNormals flag If set, then only those normals that are invalid (backfacing, zero length etc) will be fixed.
ScaleByAngle	The ScaleByAngle flag. If set, the influence of a triangle normal upon the vertex normals is scaled by the angle of the corner at the vertex.
ScaleByArea	The ScaleByArea flag. If set, the influence of a triangle normal upon the vertex normals is scaled by the area of the triangle.
Scene	The scene.
SnapNormalsToFlatSurfaces	The SnapNormalsToFlatSurfaces flag. If set, perfectly flat shaded surfaces will be created, where possible. Normals adjacent to perfectly geometrically flat surfaces will be recalculated to have the same direction as for those of the adjacent flat surface.

Methods

Method	Description
AddObserver	Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
Clear	Clear all internal states of the object. This will NOT clear the parameters set in the object. (Inherited from ProcessingObject)
GetClass	Get the name of the NormalRepairer class. (Inherited from Object)
GetPercentDone	Returns the current progress of the processing as a value between 0 and 100. (Inherited from ProcessingObject)
IsA	Returns true if NormalRepairer is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNull	Returns true if the NormalRepairer object is invalid. (Inherited from Object)
IsSameObjectAs	Returns true if the NormalRepairer object is valid. (Inherited from Object)
NonNull	Returns true if the NormalRepairer object is valid. (Inherited from Object)
PrintInfo	Prints the content/info of the NormalRepairer object to the log. (Inherited from Object)
RemoveObserver	Removes a previously added observer object. (Inherited from Object)
RunProcessing	Runs the processing the object is designed for. If the process succeeds, the return value is NoError. If the process fails, and the error is recoverable, an error code is returned. (Inherited from ProcessingObject)
SetAutoCorrectionAllowsDoubleSided	Set true to allow for double sided triangles.
SetAutoCorrectionRatioThreshold	The threshold ratio for auto correction.
SetAutoCorrectionSingleSidedThreshold	The threshold ratio for auto correction to treat triangle as single sided.
ToJSON	Get settings as JSON for debugging purposes. (Inherited from ProcessingObject)

Static methods

Method	Description
IsClassA	Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCast	SafeCast makes sure the input object is of a class that can be cast into spNormalRepairer, and if this is the case, returns the object cast into spNormalRepairer. (Inherited from Object)

Properties details

FlipFacesAndNormals

Set/Get setting for whether and how to flip the faces and or normals in the scene. None - Don't flip Automatic - Automatically detect and fix backfaces per part MakeDoubleSided - Append inverted winded triangles with inverted normals to the geometry InvertFaces - Invert the winding of the triangles InvertNormals - Invert the vertex normals InvertFacesAndNormals - Invert winding of all triangles and vertex normals.

Type	Name	Min	Max	Description
EFlipFacesAndNormals	value			The desired flag value.

Key	Value	Comment
NoFlip	0	Don't flip.
Automatic	1	Automatically detect and fix backfaces per part.
MakeDoubleSided	2	Append inverted winded triangles with inverted normals to the geometry.
InvertFaces	3	Invert the winding of the triangles.
InvertNormals	4	Invert the vertex normals.
InvertFacesAndNormals	5	Invert winding of all triangles and vertex normals.

Type	Name	Min	Max	Description
EFlipFacesAndNormals	value			The desired flag value.

Key	Value	Comment
NoFlip	0	Don't flip.
Automatic	1	Automatically detect and fix backfaces per part.
MakeDoubleSided	2	Append inverted winded triangles with inverted normals to the geometry.
InvertFaces	3	Invert the winding of the triangles.
InvertNormals	4	Invert the vertex normals.
InvertFacesAndNormals	5	Invert winding of all triangles and vertex normals.

Name	Type	Min	Max	Description
value	EFlipFacesAndNormals			The desired flag value.

Key	Value	Comment
EFlipFacesAndNormals_NoFlip	0	Don't flip.
EFlipFacesAndNormals_Automatic	1	Automatically detect and fix backfaces per part.
EFlipFacesAndNormals_MakeDoubleSided	2	Append inverted winded triangles with inverted normals to the geometry.
EFlipFacesAndNormals_InvertFaces	3	Invert the winding of the triangles.
EFlipFacesAndNormals_InvertNormals	4	Invert the vertex normals.
EFlipFacesAndNormals_InvertFacesAndNormals	5	Invert winding of all triangles and vertex normals.

Geometry

The Geometry object.

Type	Name	Min	Max	Description
GeometryData	value			The geometry that is to be repaired.

Type	Name	Min	Max	Description
GeometryData	value			The geometry that is to be repaired.

Name	Type	Min	Max	Description
value	GeometryData			The geometry that is to be repaired.

HardEdgeAngle

The edge angle in degrees above which an edge is considered "hard".

Type	Name	Min	Max	Description
`real`	value	0	180	The value to which HardEdgeAngle is to be set.

Type	Name	Min	Max	Description
`float`	value	0	180	The value to which HardEdgeAngle is to be set.

Name	Type	Min	Max	Description
value	`float`	0	180	The value to which HardEdgeAngle is to be set.

Name

The name of the NormalRepairer object. (Inherited from Object)

Type	Name	Min	Max	Description
`const char *`	name			New name of the object.

Type	Name	Min	Max	Description
`string`	name			New name of the object.

Name	Type	Min	Max	Description
name	`str`			New name of the object.

ProcessSelectionSetID

The ID of the SelectionSet containing the meshes to process If the ID is -1, all meshes are selected.

Type	Name	Min	Max	Description
`rid`	value			The selection set id to use.

Type	Name	Min	Max	Description
`int`	value			The selection set id to use.

Name	Type	Min	Max	Description
value	`int`			The selection set id to use.

ProcessSelectionSetName

Which selection set should be processed. If SetName is not found, all geometries in the scene will be processed. If both selection set name and ID are set, the name will be used.

Type	Name	Min	Max	Description
`const char *`	value			The desired SelectionSet name.

Type	Name	Min	Max	Description
`string`	value			The desired SelectionSet name.

Name	Type	Min	Max	Description
value	`str`			The desired SelectionSet name.

RecalculateNormals

Set/Get whether to recalculate new normals.

Type	Name	Min	Max	Description
`bool`	value			The new value of RecalculateNormals.

Type	Name	Min	Max	Description
`bool`	value			The new value of RecalculateNormals.

Name	Type	Min	Max	Description
value	`bool`			The new value of RecalculateNormals.

RepairOnlyInvalidNormals

The RepairOnlyInvalidNormals flag If set, then only those normals that are invalid (backfacing, zero length etc) will be fixed.

Type	Name	Min	Max	Description
`bool`	value			The value to which the RepairOnlyInvalidNormals bool is to be set.

Type	Name	Min	Max	Description
`bool`	value			The value to which the RepairOnlyInvalidNormals bool is to be set.

Name	Type	Min	Max	Description
value	`bool`			The value to which the RepairOnlyInvalidNormals bool is to be set.

ScaleByAngle

The ScaleByAngle flag. If set, the influence of a triangle normal upon the vertex normals is scaled by the angle of the corner at the vertex.

Type	Name	Min	Max	Description
`bool`	value			The value to which the ScaleByAngle bool is to be set.

Type	Name	Min	Max	Description
`bool`	value			The value to which the ScaleByAngle bool is to be set.

Name	Type	Min	Max	Description
value	`bool`			The value to which the ScaleByAngle bool is to be set.

ScaleByArea

The ScaleByArea flag. If set, the influence of a triangle normal upon the vertex normals is scaled by the area of the triangle.

Type	Name	Min	Max	Description
`bool`	value			The value to which the ScaleByArea bool is to be set.

Type	Name	Min	Max	Description
`bool`	value			The value to which the ScaleByArea bool is to be set.

Name	Type	Min	Max	Description
value	`bool`			The value to which the ScaleByArea bool is to be set.

Scene

The scene.

Type	Name	Min	Max	Description
Scene	value			The scene object to use.

Type	Name	Min	Max	Description
Scene	value			The scene object to use.

Name	Type	Min	Max	Description
value	Scene			The scene object to use.

SnapNormalsToFlatSurfaces

The SnapNormalsToFlatSurfaces flag. If set, perfectly flat shaded surfaces will be created, where possible. Normals adjacent to perfectly geometrically flat surfaces will be recalculated to have the same direction as for those of the adjacent flat surface.

Type	Name	Min	Max	Description
`bool`	value			To use for SnapNormalsToFlatSurfaces.

Type	Name	Min	Max	Description
`bool`	value			To use for SnapNormalsToFlatSurfaces.

Name	Type	Min	Max	Description
value	`bool`			To use for SnapNormalsToFlatSurfaces.

Methods details

AddObserver

Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)

Type	Name	Min	Max	Description
`Observer`	observer			Observer is the object that will receive events.

Type	Name	Min	Max	Description
`Observer`	observer			Observer is the object that will receive events.

Name	Type	Min	Max	Description
observer	`Observer`			Observer is the object that will receive events.

Clear

Clear all internal states of the object. This will NOT clear the parameters set in the object.

GetClass

Get the name of the NormalRepairer class. (Inherited from Object)

GetPercentDone

Returns the current progress of the processing as a value between 0 and 100.

IsA

Returns true if NormalRepairer is a or is a descendant of the class named as the type parameter. (Inherited from Object)

Type	Name	Min	Max	Description
`const char *`	type			Name of the class to check if NormalRepairer is, or is a descendant of.

Type	Name	Min	Max	Description
`string`	type			Name of the class to check if NormalRepairer is, or is a descendant of.

Name	Type	Min	Max	Description
type	`str`			Name of the class to check if NormalRepairer is, or is a descendant of.

IsNull

Returns true if the NormalRepairer object is invalid. (Inherited from Object)

IsSameObjectAs

Returns true if the NormalRepairer object is valid. (Inherited from Object)

Type	Name	Min	Max	Description
Object	object			Object to compare with.

Type	Name	Min	Max	Description
Object	object			Object to compare with.

NonNull

Returns true if the NormalRepairer object is valid. (Inherited from Object)

PrintInfo

Prints the content/info of the NormalRepairer object to the log. (Inherited from Object)

RemoveObserver

Removes a previously added observer object. (Inherited from Object)

RunProcessing

Runs the processing the object is designed for. If the process succeeds, the return value is NoError. If the process fails, and the error is recoverable, an error code is returned.

Syntax

cpp

Simplygon::EErrorCodes RunProcessing() const;

Parameters

RunProcessing takes no parameters.

Return value

Type: EErrorCodes

Key	Value	Comment
NoError	0	No error, the initialization or process has finished, and with no errors
NoLicense	-1	no license was found (or licence expired)
NotInitialized	-2	the SDK is not initialized, or no process object has been loaded/created
AlreadyInitialized	-3	the SDK is already initialized
DLLOrDependenciesNotFound	-4	the specified file was not found. This might also mean that a .dll cannot be loaded because there is a missing dependency, such as the runtime environment.
InvalidInputParam	-5	an invalid parameter was passed to the method
FailedTesting	-6	the reduction failed post-testing
DLLAndHeaderFileIsNotMatching	-7	the Simplygon DLL and header file interface versions do not match
DLLFailedToLoad	-8	the Simplygon DLL failed loading, probably because of a missing dependency
LicenseNotForThisApplication	-9	the license is not made for this application of Simplygon
LicenseNotForThisPlatform	-10	the license is not made for this platform of Simplygon
LicenseNotForThisVersion	-11	the license is not made for this version of Simplygon
FailedToCreatePipelineSerializer	-12	failed to create pipeline serializer
FailedToRunPipeline	-13	failed to run pipeline
UnhandledException	-14	an unhandled exception was encountered
FileError	-15	a file read/write failed.
InvalidPath	-16	a path is invalid or a file/directory is missing.
DependencyMissing	-17	a needed dependency is missing. see log for info on what is missing.
UnexpectedError	-18	an unexpected error happened.
FailedToUploadFreeLicenseAsset	-50	failed to upload free license asset
ExceptionalError	-1000	An exceptional and fatal error occurred, and has been reported to the error handler. The library is placed in an exceptional state, and you should unload and reload the Simplygon library to avoid memory leaks.
FailedToResolveLicenseServerHostName	-10001	cannot reach the licensing server, cant look up server, check DNS
FailedToConnectToLicenseServer	-10002	cannot contact the licensing server, check firewall/proxy server
FailedToConnectToLicenseServerAndSendData	-10003	Failed to connect to the license server. Please check that your internet connection is working and outgoing connections to license.simplygon.com port 443 are not blocked by a firewall or proxy.
FailedToConnectToLicenseServerAndReceiveData	-10004	cannot receive data from the licensing server, check firewall/proxy server
DataFromLicenseServerIsCorrupt	-10005	data from licensing server is corrupted, try again, check connection
LicenseHasExpired	-10006	the license has expired
LicenseIsInvalid	-10007	the license data is corrupted, please reinstall the license key
LicenseNotForThisProduct	-10008	the license is not for this product, please contact licensing, and replace license key
NoNetworkCardFound	-10009	no network card was found on the machine
LicenseDecodeFailed	-10010	could not decode license, it is corrupted
LicenseLockNotMatchingMachine	-10011	the license is locked to another machine
ConnectionToLicenseServerLost	-10012	Connection to license server lost
LicenseHashDataCorrupt	-10013	could not decode license, it is corrupted
LicenseExpired	-10014	the license is invalid, please contact licensing
LicenseNotLockedForThisMachine	-10020	the license is locked to another machine
YourLicenseRequiresLatestWindows10	-10024	your license requires latest Windows 10 version
LicenseServerReturnedBadRequest	-10400	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingCap	-10403	You have reached the maximum number of processings for your license. Please try again in 24 hours or reach out to SimplygonSales@microsoft.com for support..
UnknownLicenseKey	-10404	You are using an unknown license key. Please verify so you typed in the license key correctly and try again
LicenseIsNotActive	-10410	You are using an inactive license key. Please reach out to SimplygonSales[at]microsoft.com for support
MaxNodesReachForThisLicense	-10409	You have reached the maximum number of nodes for your license. After 48 hours of not using Simplygon on a machine the license will be released and can be installed on another machine
YourLicenseRequiresLatestSimplygon	-10426	The license key you are using requires you to update to the latest version before you can use Simplygon
LicenseServerReturnServerError	-10501	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingValidationError	-20001	The process was aborted, because of a validation error. Either the process settings or the input data was invalid, or a combination thereof. Use GetErrorMessages in the main Simplygon object to retrieve error messages, and see the log for details. Note that the library is not left in an exceptional state, and it is safe to continue processing other scenes.

Syntax

csharp

EErrorCodes RunProcessing();

Parameters

RunProcessing takes no parameters.

Return value

Type: EErrorCodes

Key	Value	Comment
NoError	0	No error, the initialization or process has finished, and with no errors
NoLicense	-1	no license was found (or licence expired)
NotInitialized	-2	the SDK is not initialized, or no process object has been loaded/created
AlreadyInitialized	-3	the SDK is already initialized
DLLOrDependenciesNotFound	-4	the specified file was not found. This might also mean that a .dll cannot be loaded because there is a missing dependency, such as the runtime environment.
InvalidInputParam	-5	an invalid parameter was passed to the method
FailedTesting	-6	the reduction failed post-testing
DLLAndHeaderFileIsNotMatching	-7	the Simplygon DLL and header file interface versions do not match
DLLFailedToLoad	-8	the Simplygon DLL failed loading, probably because of a missing dependency
LicenseNotForThisApplication	-9	the license is not made for this application of Simplygon
LicenseNotForThisPlatform	-10	the license is not made for this platform of Simplygon
LicenseNotForThisVersion	-11	the license is not made for this version of Simplygon
FailedToCreatePipelineSerializer	-12	failed to create pipeline serializer
FailedToRunPipeline	-13	failed to run pipeline
UnhandledException	-14	an unhandled exception was encountered
FileError	-15	a file read/write failed.
InvalidPath	-16	a path is invalid or a file/directory is missing.
DependencyMissing	-17	a needed dependency is missing. see log for info on what is missing.
UnexpectedError	-18	an unexpected error happened.
FailedToUploadFreeLicenseAsset	-50	failed to upload free license asset
ExceptionalError	-1000	An exceptional and fatal error occurred, and has been reported to the error handler. The library is placed in an exceptional state, and you should unload and reload the Simplygon library to avoid memory leaks.
FailedToResolveLicenseServerHostName	-10001	cannot reach the licensing server, cant look up server, check DNS
FailedToConnectToLicenseServer	-10002	cannot contact the licensing server, check firewall/proxy server
FailedToConnectToLicenseServerAndSendData	-10003	Failed to connect to the license server. Please check that your internet connection is working and outgoing connections to license.simplygon.com port 443 are not blocked by a firewall or proxy.
FailedToConnectToLicenseServerAndReceiveData	-10004	cannot receive data from the licensing server, check firewall/proxy server
DataFromLicenseServerIsCorrupt	-10005	data from licensing server is corrupted, try again, check connection
LicenseHasExpired	-10006	the license has expired
LicenseIsInvalid	-10007	the license data is corrupted, please reinstall the license key
LicenseNotForThisProduct	-10008	the license is not for this product, please contact licensing, and replace license key
NoNetworkCardFound	-10009	no network card was found on the machine
LicenseDecodeFailed	-10010	could not decode license, it is corrupted
LicenseLockNotMatchingMachine	-10011	the license is locked to another machine
ConnectionToLicenseServerLost	-10012	Connection to license server lost
LicenseHashDataCorrupt	-10013	could not decode license, it is corrupted
LicenseExpired	-10014	the license is invalid, please contact licensing
LicenseNotLockedForThisMachine	-10020	the license is locked to another machine
YourLicenseRequiresLatestWindows10	-10024	your license requires latest Windows 10 version
LicenseServerReturnedBadRequest	-10400	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingCap	-10403	You have reached the maximum number of processings for your license. Please try again in 24 hours or reach out to SimplygonSales@microsoft.com for support..
UnknownLicenseKey	-10404	You are using an unknown license key. Please verify so you typed in the license key correctly and try again
LicenseIsNotActive	-10410	You are using an inactive license key. Please reach out to SimplygonSales[at]microsoft.com for support
MaxNodesReachForThisLicense	-10409	You have reached the maximum number of nodes for your license. After 48 hours of not using Simplygon on a machine the license will be released and can be installed on another machine
YourLicenseRequiresLatestSimplygon	-10426	The license key you are using requires you to update to the latest version before you can use Simplygon
LicenseServerReturnServerError	-10501	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingValidationError	-20001	The process was aborted, because of a validation error. Either the process settings or the input data was invalid, or a combination thereof. Use GetErrorMessages in the main Simplygon object to retrieve error messages, and see the log for details. Note that the library is not left in an exceptional state, and it is safe to continue processing other scenes.

Syntax

python

EErrorCodes_* RunProcessing()

Parameters

RunProcessing takes no parameters.

Return value

Type: EErrorCodes

Key	Value	Comment
EErrorCodes_NoError	0	No error, the initialization or process has finished, and with no errors
EErrorCodes_NoLicense	-1	no license was found (or licence expired)
EErrorCodes_NotInitialized	-2	the SDK is not initialized, or no process object has been loaded/created
EErrorCodes_AlreadyInitialized	-3	the SDK is already initialized
EErrorCodes_DLLOrDependenciesNotFound	-4	the specified file was not found. This might also mean that a .dll cannot be loaded because there is a missing dependency, such as the runtime environment.
EErrorCodes_InvalidInputParam	-5	an invalid parameter was passed to the method
EErrorCodes_FailedTesting	-6	the reduction failed post-testing
EErrorCodes_DLLAndHeaderFileIsNotMatching	-7	the Simplygon DLL and header file interface versions do not match
EErrorCodes_DLLFailedToLoad	-8	the Simplygon DLL failed loading, probably because of a missing dependency
EErrorCodes_LicenseNotForThisApplication	-9	the license is not made for this application of Simplygon
EErrorCodes_LicenseNotForThisPlatform	-10	the license is not made for this platform of Simplygon
EErrorCodes_LicenseNotForThisVersion	-11	the license is not made for this version of Simplygon
EErrorCodes_FailedToCreatePipelineSerializer	-12	failed to create pipeline serializer
EErrorCodes_FailedToRunPipeline	-13	failed to run pipeline
EErrorCodes_UnhandledException	-14	an unhandled exception was encountered
EErrorCodes_FileError	-15	a file read/write failed.
EErrorCodes_InvalidPath	-16	a path is invalid or a file/directory is missing.
EErrorCodes_DependencyMissing	-17	a needed dependency is missing. see log for info on what is missing.
EErrorCodes_UnexpectedError	-18	an unexpected error happened.
EErrorCodes_FailedToUploadFreeLicenseAsset	-50	failed to upload free license asset
EErrorCodes_ExceptionalError	-1000	An exceptional and fatal error occurred, and has been reported to the error handler. The library is placed in an exceptional state, and you should unload and reload the Simplygon library to avoid memory leaks.
EErrorCodes_FailedToResolveLicenseServerHostName	-10001	cannot reach the licensing server, cant look up server, check DNS
EErrorCodes_FailedToConnectToLicenseServer	-10002	cannot contact the licensing server, check firewall/proxy server
EErrorCodes_FailedToConnectToLicenseServerAndSendData	-10003	Failed to connect to the license server. Please check that your internet connection is working and outgoing connections to license.simplygon.com port 443 are not blocked by a firewall or proxy.
EErrorCodes_FailedToConnectToLicenseServerAndReceiveData	-10004	cannot receive data from the licensing server, check firewall/proxy server
EErrorCodes_DataFromLicenseServerIsCorrupt	-10005	data from licensing server is corrupted, try again, check connection
EErrorCodes_LicenseHasExpired	-10006	the license has expired
EErrorCodes_LicenseIsInvalid	-10007	the license data is corrupted, please reinstall the license key
EErrorCodes_LicenseNotForThisProduct	-10008	the license is not for this product, please contact licensing, and replace license key
EErrorCodes_NoNetworkCardFound	-10009	no network card was found on the machine
EErrorCodes_LicenseDecodeFailed	-10010	could not decode license, it is corrupted
EErrorCodes_LicenseLockNotMatchingMachine	-10011	the license is locked to another machine
EErrorCodes_ConnectionToLicenseServerLost	-10012	Connection to license server lost
EErrorCodes_LicenseHashDataCorrupt	-10013	could not decode license, it is corrupted
EErrorCodes_LicenseExpired	-10014	the license is invalid, please contact licensing
EErrorCodes_LicenseNotLockedForThisMachine	-10020	the license is locked to another machine
EErrorCodes_YourLicenseRequiresLatestWindows10	-10024	your license requires latest Windows 10 version
EErrorCodes_LicenseServerReturnedBadRequest	-10400	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
EErrorCodes_ProcessingCap	-10403	You have reached the maximum number of processings for your license. Please try again in 24 hours or reach out to SimplygonSales@microsoft.com for support..
EErrorCodes_UnknownLicenseKey	-10404	You are using an unknown license key. Please verify so you typed in the license key correctly and try again
EErrorCodes_LicenseIsNotActive	-10410	You are using an inactive license key. Please reach out to SimplygonSales[at]microsoft.com for support
EErrorCodes_MaxNodesReachForThisLicense	-10409	You have reached the maximum number of nodes for your license. After 48 hours of not using Simplygon on a machine the license will be released and can be installed on another machine
EErrorCodes_YourLicenseRequiresLatestSimplygon	-10426	The license key you are using requires you to update to the latest version before you can use Simplygon
EErrorCodes_LicenseServerReturnServerError	-10501	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
EErrorCodes_ProcessingValidationError	-20001	The process was aborted, because of a validation error. Either the process settings or the input data was invalid, or a combination thereof. Use GetErrorMessages in the main Simplygon object to retrieve error messages, and see the log for details. Note that the library is not left in an exceptional state, and it is safe to continue processing other scenes.

SetAutoCorrectionAllowsDoubleSided

Set true to allow for double sided triangles.

SetAutoCorrectionRatioThreshold

The threshold ratio for auto correction.

SetAutoCorrectionSingleSidedThreshold

The threshold ratio for auto correction to treat triangle as single sided.

ToJSON

Get settings as JSON for debugging purposes.

Static methods details

IsClassA

Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)

SafeCast

SafeCast makes sure the input object is of a class that can be cast into spNormalRepairer, and if this is the case, returns the object cast into spNormalRepairer. (Inherited from Object)

Material casters

Array

ObjectCollection

Table

GraphicsExporter

GraphicsImporter

ShaderParameter

Pipeline

ProcessingObject

SettingsObject

SceneNode

ShadingNode

class NormalRepairer ​

Properties ​

Methods ​

Static methods ​

Properties details ​

FlipFacesAndNormals ​

Geometry ​

HardEdgeAngle ​

Name ​

ProcessSelectionSetID ​

ProcessSelectionSetName ​

RecalculateNormals ​

RepairOnlyInvalidNormals ​

ScaleByAngle ​

ScaleByArea ​

`class` NormalRepairer

Properties

Methods

Static methods

Properties details

FlipFacesAndNormals

Geometry

HardEdgeAngle

Name

ProcessSelectionSetID

ProcessSelectionSetName

RecalculateNormals

RepairOnlyInvalidNormals

ScaleByAngle

ScaleByArea