Simplygon 10.2.10100.0
class RepairSettings
Settings for handling unconnected parts and unwanted gaps in the geometry. It consists of two parts, Welding and T-junction removal. Welding merges vertices that are closer than a set distance from each other. T-junction removal finds open edges that lies within a set distance from other open edges, but without matching vertices. It then splits those triangles into smaller, matching triangles and fuses them together.
Properties
| Property | Description |
|---|---|
| Name | The name of the RepairSettings object. (Inherited from Object) |
| ProgressivePasses | The number of progressive passes. Minimum is 1, but higher numbers give a better quality, at the expense of longer running time. |
| TJuncDist | The T-Junction distance, below which, the T-Junctions will be welded. |
| UseTJunctionRemover | If set, t-junctions will be removed. If enabled, it also requires UseWelding to be on. |
| UseWelding | If set, vertices within each others welding distance will be welded together. |
| WeldDist | The welding distance below which the vertices will be welded. |
| WeldOnlyBetweenSceneNodes | If set, only vertices that belong to different scene nodes are considered for the welding. Affects both welder and t-junction remover. |
| WeldOnlyBorderVertices | If set, only vertices that are on the border (as reported by the VertexBorder boolean field) are considered for the welding. |
| WeldOnlyWithinMaterial | If set, only vertices that are within the same material are welded. Vertices on material borders are locked. |
| WeldOnlyWithinSceneNode | If set, only vertices that are within the same scene node are welded. |
Methods
| Method | Description |
|---|---|
| AddObserver | Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object) |
| GetBoolParameter | Get a named parameter boolean value. (Inherited from SettingsObject) |
| GetClass | Get the name of the RepairSettings class. (Inherited from Object) |
| GetDoubleParameter | Get a named parameter floating point value. (Inherited from SettingsObject) |
| GetErrorString | Returns a string describing the error that was found the last time ValidateSettings was performed. (Inherited from SettingsObject) |
| GetIntParameter | Get a named parameter integer value. (Inherited from SettingsObject) |
| GetStringParameter | Get a named parameter string value. (Inherited from SettingsObject) |
| GetUIntParameter | Get a named parameter unsigned integer value. (Inherited from SettingsObject) |
| IsA | Returns true if RepairSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
| IsNull | Returns true if the RepairSettings object is invalid. (Inherited from Object) |
| IsSameObjectAs | Returns true if the RepairSettings object is valid. (Inherited from Object) |
| NonNull | Returns true if the RepairSettings object is valid. (Inherited from Object) |
| PrintInfo | Prints the content/info of the RepairSettings object to the log. (Inherited from Object) |
| RemoveObserver | Removes a previously added observer object. (Inherited from Object) |
| SetBoolParameter | Set a named parameter boolean value. (Inherited from SettingsObject) |
| SetDoubleParameter | Set a named parameter floating point value. (Inherited from SettingsObject) |
| SetIntParameter | Set a named parameter integer value. (Inherited from SettingsObject) |
| SetStringParameter | Set a named parameter string value. (Inherited from SettingsObject) |
| SetUIntParameter | Set a named parameter unsigned integer value. (Inherited from SettingsObject) |
| SetValidateParameterNames | Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled. (Inherited from SettingsObject) |
| ToJSON | Get settings as JSON for debugging purposes. (Inherited from SettingsObject) |
| ValidateSettings | Validates the current settings values. (Inherited from SettingsObject) |
Static methods
| Method | Description |
|---|---|
| IsClassA | Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
| SafeCast | SafeCast makes sure the input object is of a class that can be cast into spRepairSettings, and if this is the case, returns the object cast into spRepairSettings. (Inherited from Object) |
Properties details
Name
The name of the RepairSettings object. (Inherited from Object)
ProgressivePasses
The number of progressive passes. Minimum is 1, but higher numbers give a better quality, at the expense of longer running time.
TJuncDist
The T-Junction distance, below which, the T-Junctions will be welded.
UseTJunctionRemover
If set, t-junctions will be removed. If enabled, it also requires UseWelding to be on.
UseWelding
If set, vertices within each others welding distance will be welded together.
WeldDist
The welding distance below which the vertices will be welded.
WeldOnlyBetweenSceneNodes
If set, only vertices that belong to different scene nodes are considered for the welding. Affects both welder and t-junction remover.
WeldOnlyBorderVertices
If set, only vertices that are on the border (as reported by the VertexBorder boolean field) are considered for the welding.
WeldOnlyWithinMaterial
If set, only vertices that are within the same material are welded. Vertices on material borders are locked.
WeldOnlyWithinSceneNode
If set, only vertices that are within the same scene node are welded.
Methods details
AddObserver
Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
GetBoolParameter
Get a named parameter boolean value.
GetClass
Get the name of the RepairSettings class. (Inherited from Object)
GetDoubleParameter
Get a named parameter floating point value.
GetErrorString
Returns a string describing the error that was found the last time ValidateSettings was performed.
GetIntParameter
Get a named parameter integer value.
GetStringParameter
Get a named parameter string value.
GetUIntParameter
Get a named parameter unsigned integer value.
IsA
Returns true if RepairSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNull
Returns true if the RepairSettings object is invalid. (Inherited from Object)
IsSameObjectAs
Returns true if the RepairSettings object is valid. (Inherited from Object)
NonNull
Returns true if the RepairSettings object is valid. (Inherited from Object)
PrintInfo
Prints the content/info of the RepairSettings object to the log. (Inherited from Object)
RemoveObserver
Removes a previously added observer object. (Inherited from Object)
SetBoolParameter
Set a named parameter boolean value.
SetDoubleParameter
Set a named parameter floating point value.
SetIntParameter
Set a named parameter integer value.
SetStringParameter
Set a named parameter string value.
SetUIntParameter
Set a named parameter unsigned integer value.
SetValidateParameterNames
Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled.
ToJSON
Get settings as JSON for debugging purposes.
ValidateSettings
Validates the current settings values.
Static methods details
IsClassA
Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCast
SafeCast makes sure the input object is of a class that can be cast into spRepairSettings, and if this is the case, returns the object cast into spRepairSettings. (Inherited from Object)