Simplygon 10.2.10100.0
class GeometryCullingSettings
Settings for volumetric triangle culling functionality. These settings control the clipping planes and geometries that are used for triangle culling the output of Simplygon scene processors.
Properties
| Property | Description |
|---|---|
| ClippingGeometrySelectionSetID | Which SelectionSet containing geometries will be used for clipping. Set name is prioritized over id if both are set. |
| ClippingGeometrySelectionSetName | Which SelectionSet containing geometries will be used for clipping. Set name is prioritized over id if both are set. |
| ClippingPlaneSelectionSetID | Which SelectionSet containing sceneplanes will be used for clipping. Set name is prioritized over id if both are set. |
| ClippingPlaneSelectionSetName | Which SelectionSet containing sceneplanes will be used for clipping. Set name is prioritized over id if both are set. |
| Name | The name of the GeometryCullingSettings object. (Inherited from Object) |
| UseClippingGeometry | If set, the geometries defined in the matching selection set will be used to clip the process geometry. What side of the geometry that will be culled is determined by the triangle facing, so make sure your winding is correct and that triangles point "up" toward the space you want to keep. Inconsistent triangle winding or meshes that do not have a clear local inside and outside will cause inconsistent results when used as clipping geometries. |
| UseClippingPlanes | If true the ScenePlanes in the input scene (or the planes selected by the selection set settings) will be used to clip the mesh. |
Methods
| Method | Description |
|---|---|
| AddObserver | Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object) |
| GetBoolParameter | Get a named parameter boolean value. (Inherited from SettingsObject) |
| GetClass | Get the name of the GeometryCullingSettings class. (Inherited from Object) |
| GetDoubleParameter | Get a named parameter floating point value. (Inherited from SettingsObject) |
| GetErrorString | Returns a string describing the error that was found the last time ValidateSettings was performed. (Inherited from SettingsObject) |
| GetIntParameter | Get a named parameter integer value. (Inherited from SettingsObject) |
| GetStringParameter | Get a named parameter string value. (Inherited from SettingsObject) |
| GetUIntParameter | Get a named parameter unsigned integer value. (Inherited from SettingsObject) |
| IsA | Returns true if GeometryCullingSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
| IsNull | Returns true if the GeometryCullingSettings object is invalid. (Inherited from Object) |
| IsSameObjectAs | Returns true if the GeometryCullingSettings object is valid. (Inherited from Object) |
| NonNull | Returns true if the GeometryCullingSettings object is valid. (Inherited from Object) |
| PrintInfo | Prints the content/info of the GeometryCullingSettings object to the log. (Inherited from Object) |
| RemoveObserver | Removes a previously added observer object. (Inherited from Object) |
| SetBoolParameter | Set a named parameter boolean value. (Inherited from SettingsObject) |
| SetDoubleParameter | Set a named parameter floating point value. (Inherited from SettingsObject) |
| SetIntParameter | Set a named parameter integer value. (Inherited from SettingsObject) |
| SetStringParameter | Set a named parameter string value. (Inherited from SettingsObject) |
| SetUIntParameter | Set a named parameter unsigned integer value. (Inherited from SettingsObject) |
| SetValidateParameterNames | Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled. (Inherited from SettingsObject) |
| ToJSON | Get settings as JSON for debugging purposes. (Inherited from SettingsObject) |
| ValidateSettings | Validates the current settings values. (Inherited from SettingsObject) |
Static methods
| Method | Description |
|---|---|
| IsClassA | Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
| SafeCast | SafeCast makes sure the input object is of a class that can be cast into spGeometryCullingSettings, and if this is the case, returns the object cast into spGeometryCullingSettings. (Inherited from Object) |
Properties details
ClippingGeometrySelectionSetID
Which SelectionSet containing geometries will be used for clipping. Set name is prioritized over id if both are set.
ClippingGeometrySelectionSetName
Which SelectionSet containing geometries will be used for clipping. Set name is prioritized over id if both are set.
ClippingPlaneSelectionSetID
Which SelectionSet containing sceneplanes will be used for clipping. Set name is prioritized over id if both are set.
ClippingPlaneSelectionSetName
Which SelectionSet containing sceneplanes will be used for clipping. Set name is prioritized over id if both are set.
Name
The name of the GeometryCullingSettings object. (Inherited from Object)
UseClippingGeometry
If set, the geometries defined in the matching selection set will be used to clip the process geometry. What side of the geometry that will be culled is determined by the triangle facing, so make sure your winding is correct and that triangles point "up" toward the space you want to keep. Inconsistent triangle winding or meshes that do not have a clear local inside and outside will cause inconsistent results when used as clipping geometries.
UseClippingPlanes
If true the ScenePlanes in the input scene (or the planes selected by the selection set settings) will be used to clip the mesh.
Methods details
AddObserver
Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
GetBoolParameter
Get a named parameter boolean value.
GetClass
Get the name of the GeometryCullingSettings class. (Inherited from Object)
GetDoubleParameter
Get a named parameter floating point value.
GetErrorString
Returns a string describing the error that was found the last time ValidateSettings was performed.
GetIntParameter
Get a named parameter integer value.
GetStringParameter
Get a named parameter string value.
GetUIntParameter
Get a named parameter unsigned integer value.
IsA
Returns true if GeometryCullingSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNull
Returns true if the GeometryCullingSettings object is invalid. (Inherited from Object)
IsSameObjectAs
Returns true if the GeometryCullingSettings object is valid. (Inherited from Object)
NonNull
Returns true if the GeometryCullingSettings object is valid. (Inherited from Object)
PrintInfo
Prints the content/info of the GeometryCullingSettings object to the log. (Inherited from Object)
RemoveObserver
Removes a previously added observer object. (Inherited from Object)
SetBoolParameter
Set a named parameter boolean value.
SetDoubleParameter
Set a named parameter floating point value.
SetIntParameter
Set a named parameter integer value.
SetStringParameter
Set a named parameter string value.
SetUIntParameter
Set a named parameter unsigned integer value.
SetValidateParameterNames
Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled.
ToJSON
Get settings as JSON for debugging purposes.
ValidateSettings
Validates the current settings values.
Static methods details
IsClassA
Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCast
SafeCast makes sure the input object is of a class that can be cast into spGeometryCullingSettings, and if this is the case, returns the object cast into spGeometryCullingSettings. (Inherited from Object)