Simplygon 10.2.10100.0
class HighDensityMeshReductionSettings
The HighDensityMeshReductionSettings settings object for the high density reduction pipeline and processor.
Properties
| Property | Description |
|---|---|
| MaxDeviation | The MaxDeviation value, the maximum surface-deviation between the reduced geometry and the original. |
| MaxDeviationEnabled | Enable max deviation as a reduction target. The reducer will stop when the set max deviation has been reached. |
| Name | The name of the HighDensityMeshReductionSettings object. (Inherited from Object) |
| OnScreenSize | The OnScreenSize value, used to calculate the maximum surface-deviation allowed, by assuming errors less than 1 pixel onscreen will not be noticeable. |
| OnScreenSizeEnabled | Enable on screen size as a reduction target. The reducer will stop when the set on screen size has been reached. |
| ProcessSelectionSetName | The name of the selection set which should be processed. If not set, all geometries in the scene will be processed. |
| StopCondition | The stop condition for the reducer to finish processing. Any -> the reducer will stop when any single one of the set reduction targets have been reached. All -> the reducer will stop when all enabled reduction targets have been reached. |
Methods
| Method | Description |
|---|---|
| AddObserver | Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object) |
| GetBoolParameter | Get a named parameter boolean value. (Inherited from SettingsObject) |
| GetClass | Get the name of the HighDensityMeshReductionSettings class. (Inherited from Object) |
| GetDoubleParameter | Get a named parameter floating point value. (Inherited from SettingsObject) |
| GetErrorString | Returns a string describing the error that was found the last time ValidateSettings was performed. (Inherited from SettingsObject) |
| GetIntParameter | Get a named parameter integer value. (Inherited from SettingsObject) |
| GetStringParameter | Get a named parameter string value. (Inherited from SettingsObject) |
| GetUIntParameter | Get a named parameter unsigned integer value. (Inherited from SettingsObject) |
| IsA | Returns true if HighDensityMeshReductionSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
| IsNull | Returns true if the HighDensityMeshReductionSettings object is invalid. (Inherited from Object) |
| IsSameObjectAs | Returns true if the HighDensityMeshReductionSettings object is valid. (Inherited from Object) |
| NonNull | Returns true if the HighDensityMeshReductionSettings object is valid. (Inherited from Object) |
| PrintInfo | Prints the content/info of the HighDensityMeshReductionSettings object to the log. (Inherited from Object) |
| RemoveObserver | Removes a previously added observer object. (Inherited from Object) |
| SetBoolParameter | Set a named parameter boolean value. (Inherited from SettingsObject) |
| SetDoubleParameter | Set a named parameter floating point value. (Inherited from SettingsObject) |
| SetIntParameter | Set a named parameter integer value. (Inherited from SettingsObject) |
| SetStringParameter | Set a named parameter string value. (Inherited from SettingsObject) |
| SetUIntParameter | Set a named parameter unsigned integer value. (Inherited from SettingsObject) |
| SetValidateParameterNames | Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled. (Inherited from SettingsObject) |
| ToJSON | Get settings as JSON for debugging purposes. (Inherited from SettingsObject) |
| ValidateSettings | Validates the current settings values. (Inherited from SettingsObject) |
Static methods
| Method | Description |
|---|---|
| IsClassA | Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object) |
| SafeCast | SafeCast makes sure the input object is of a class that can be cast into spHighDensityMeshReductionSettings, and if this is the case, returns the object cast into spHighDensityMeshReductionSettings. (Inherited from Object) |
Properties details
MaxDeviation
The MaxDeviation value, the maximum surface-deviation between the reduced geometry and the original.
MaxDeviationEnabled
Enable max deviation as a reduction target. The reducer will stop when the set max deviation has been reached.
Name
The name of the HighDensityMeshReductionSettings object. (Inherited from Object)
OnScreenSize
The OnScreenSize value, used to calculate the maximum surface-deviation allowed, by assuming errors less than 1 pixel onscreen will not be noticeable.
OnScreenSizeEnabled
Enable on screen size as a reduction target. The reducer will stop when the set on screen size has been reached.
ProcessSelectionSetName
The name of the selection set which should be processed. If not set, all geometries in the scene will be processed.
StopCondition
The stop condition for the reducer to finish processing. Any -> the reducer will stop when any single one of the set reduction targets have been reached. All -> the reducer will stop when all enabled reduction targets have been reached.
Methods details
AddObserver
Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
GetBoolParameter
Get a named parameter boolean value.
GetClass
Get the name of the HighDensityMeshReductionSettings class. (Inherited from Object)
GetDoubleParameter
Get a named parameter floating point value.
GetErrorString
Returns a string describing the error that was found the last time ValidateSettings was performed.
GetIntParameter
Get a named parameter integer value.
GetStringParameter
Get a named parameter string value.
GetUIntParameter
Get a named parameter unsigned integer value.
IsA
Returns true if HighDensityMeshReductionSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNull
Returns true if the HighDensityMeshReductionSettings object is invalid. (Inherited from Object)
IsSameObjectAs
Returns true if the HighDensityMeshReductionSettings object is valid. (Inherited from Object)
NonNull
Returns true if the HighDensityMeshReductionSettings object is valid. (Inherited from Object)
PrintInfo
Prints the content/info of the HighDensityMeshReductionSettings object to the log. (Inherited from Object)
RemoveObserver
Removes a previously added observer object. (Inherited from Object)
SetBoolParameter
Set a named parameter boolean value.
SetDoubleParameter
Set a named parameter floating point value.
SetIntParameter
Set a named parameter integer value.
SetStringParameter
Set a named parameter string value.
SetUIntParameter
Set a named parameter unsigned integer value.
SetValidateParameterNames
Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled.
ToJSON
Get settings as JSON for debugging purposes.
ValidateSettings
Validates the current settings values.
Static methods details
IsClassA
Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCast
SafeCast makes sure the input object is of a class that can be cast into spHighDensityMeshReductionSettings, and if this is the case, returns the object cast into spHighDensityMeshReductionSettings. (Inherited from Object)