`class` WavefrontExporter

Wavefront .obj geometry exporter.

Properties

Property	Description
ExportCascadedScenes	Flag to control if cascaded scenes should be included in the export (note that not all file formats support this). (Inherited from GraphicsExporter)
ExportFilePath	The main export file path. This is the main file being written to, and must always be set. (Inherited from GraphicsExporter)
ForceTriangleExport	Flag to force exporters that are capable of exporting quads using the information in the QuadFlags GeometryData field to ignore the quad flags and convert everything to triangles. (Inherited from GraphicsExporter)
MaterialFilePath	The material file path. If the path is not set, it is assumed to equal the path of the main obj file, but with the extension '.mtl' instead of '.obj'.
Name	The name of the WavefrontExporter object. (Inherited from Object)
PrimaryTexCoordName	The name of the texcoord level to use as primary level in case the file format only supports a single texture coordinate layer. If the primary level name is not set, the first found level will be used as primary level. (Inherited from GraphicsExporter)
ReferenceExportMode	Export mode for referenced external files in the scene, such as references to textures. File formats which do not support external references will ignore the setting and always embed the data. (Inherited from GraphicsExporter)

Methods

Method	Description
AddObserver	Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
GetClass	Get the name of the WavefrontExporter class. (Inherited from Object)
IsA	Returns true if WavefrontExporter is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNull	Returns true if the WavefrontExporter object is invalid. (Inherited from Object)
IsSameObjectAs	Returns true if the WavefrontExporter object is valid. (Inherited from Object)
NonNull	Returns true if the WavefrontExporter object is valid. (Inherited from Object)
PrintInfo	Prints the content/info of the WavefrontExporter object to the log. (Inherited from Object)
RemoveObserver	Removes a previously added observer object. (Inherited from Object)
Run	Runs the export. Note that all parameters must be setup before importing. (Inherited from GraphicsExporter)
SetScene	The scene to export. (Inherited from GraphicsExporter)
SetSelectionSet	The selection set (of nodes from the scene) to export. (Inherited from GraphicsExporter)

Static methods

Method	Description
IsClassA	Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCast	SafeCast makes sure the input object is of a class that can be cast into spWavefrontExporter, and if this is the case, returns the object cast into spWavefrontExporter. (Inherited from Object)

Properties details

ExportCascadedScenes

Flag to control if cascaded scenes should be included in the export (note that not all file formats support this).

Type	Name	Min	Max	Description
`bool`	value			Export cascaded scenes flag.

Type	Name	Min	Max	Description
`bool`	value			Export cascaded scenes flag.

Name	Type	Min	Max	Description
value	`bool`			Export cascaded scenes flag.

ExportFilePath

The main export file path. This is the main file being written to, and must always be set.

Type	Name	Min	Max	Description
`const char *`	value			The desired file path.

Type	Name	Min	Max	Description
`string`	value			The desired file path.

Name	Type	Min	Max	Description
value	`str`			The desired file path.

ForceTriangleExport

Flag to force exporters that are capable of exporting quads using the information in the QuadFlags GeometryData field to ignore the quad flags and convert everything to triangles.

Type	Name	Min	Max	Description
`bool`	value			ForceTriangleExport flag.

Type	Name	Min	Max	Description
`bool`	value			ForceTriangleExport flag.

Name	Type	Min	Max	Description
value	`bool`			ForceTriangleExport flag.

MaterialFilePath

The material file path. If the path is not set, it is assumed to equal the path of the main obj file, but with the extension '.mtl' instead of '.obj'.

Type	Name	Min	Max	Description
`const char *`	value			Is the path to the material file.

Type	Name	Min	Max	Description
`string`	value			Is the path to the material file.

Name	Type	Min	Max	Description
value	`str`			Is the path to the material file.

Name

The name of the WavefrontExporter object. (Inherited from Object)

Type	Name	Min	Max	Description
`const char *`	name			New name of the object.

Type	Name	Min	Max	Description
`string`	name			New name of the object.

Name	Type	Min	Max	Description
name	`str`			New name of the object.

PrimaryTexCoordName

The name of the texcoord level to use as primary level in case the file format only supports a single texture coordinate layer. If the primary level name is not set, the first found level will be used as primary level.

Type	Name	Min	Max	Description
`const char *`	name			The name of the primary texcoord level.

Type	Name	Min	Max	Description
`string`	name			The name of the primary texcoord level.

Name	Type	Min	Max	Description
name	`str`			The name of the primary texcoord level.

ReferenceExportMode

Export mode for referenced external files in the scene, such as references to textures. File formats which do not support external references will ignore the setting and always embed the data.

Type	Name	Min	Max	Description
EReferenceExportMode	value			Export mode value.

Key	Value	Comment
Copy	0	Copy the referenced file to the export folder, and have a relative path point at the reference.
Embed	1	Embed the referenced file in the exported scene. This is only applicable to file formats which support embedding referenced files. File formats which do not support embedded references will instead default to copy the file to the output.
AbsolutePath	2	Output the absolute path to the referenced file. This avoids copying the reference to the output. Node that this path is not portable across file systems, and will reference an absolute path on the current machine. If a reference is embedded, this setting will be ignored and a copy of the file is placed in the output path.
OriginalPath	3	Keep the original path value. This mode just copies the FilePath value verbatim to the output, and does not make sure the referenced file actually exists. If a reference is embedded, this setting will be ignored and a copy of the file is placed in the output path.

Type	Name	Min	Max	Description
EReferenceExportMode	value			Export mode value.

Key	Value	Comment
Copy	0	Copy the referenced file to the export folder, and have a relative path point at the reference.
Embed	1	Embed the referenced file in the exported scene. This is only applicable to file formats which support embedding referenced files. File formats which do not support embedded references will instead default to copy the file to the output.
AbsolutePath	2	Output the absolute path to the referenced file. This avoids copying the reference to the output. Node that this path is not portable across file systems, and will reference an absolute path on the current machine. If a reference is embedded, this setting will be ignored and a copy of the file is placed in the output path.
OriginalPath	3	Keep the original path value. This mode just copies the FilePath value verbatim to the output, and does not make sure the referenced file actually exists. If a reference is embedded, this setting will be ignored and a copy of the file is placed in the output path.

Name	Type	Min	Max	Description
value	EReferenceExportMode			Export mode value.

Key	Value	Comment
EReferenceExportMode_Copy	0	Copy the referenced file to the export folder, and have a relative path point at the reference.
EReferenceExportMode_Embed	1	Embed the referenced file in the exported scene. This is only applicable to file formats which support embedding referenced files. File formats which do not support embedded references will instead default to copy the file to the output.
EReferenceExportMode_AbsolutePath	2	Output the absolute path to the referenced file. This avoids copying the reference to the output. Node that this path is not portable across file systems, and will reference an absolute path on the current machine. If a reference is embedded, this setting will be ignored and a copy of the file is placed in the output path.
EReferenceExportMode_OriginalPath	3	Keep the original path value. This mode just copies the FilePath value verbatim to the output, and does not make sure the referenced file actually exists. If a reference is embedded, this setting will be ignored and a copy of the file is placed in the output path.

Methods details

AddObserver

Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)

Type	Name	Min	Max	Description
`Observer`	observer			Observer is the object that will receive events.

Type	Name	Min	Max	Description
`Observer`	observer			Observer is the object that will receive events.

Name	Type	Min	Max	Description
observer	`Observer`			Observer is the object that will receive events.

GetClass

Get the name of the WavefrontExporter class. (Inherited from Object)

IsA

Returns true if WavefrontExporter is a or is a descendant of the class named as the type parameter. (Inherited from Object)

Type	Name	Min	Max	Description
`const char *`	type			Name of the class to check if WavefrontExporter is, or is a descendant of.

Type	Name	Min	Max	Description
`string`	type			Name of the class to check if WavefrontExporter is, or is a descendant of.

Name	Type	Min	Max	Description
type	`str`			Name of the class to check if WavefrontExporter is, or is a descendant of.

IsNull

Returns true if the WavefrontExporter object is invalid. (Inherited from Object)

IsSameObjectAs

Returns true if the WavefrontExporter object is valid. (Inherited from Object)

Type	Name	Min	Max	Description
Object	object			Object to compare with.

Type	Name	Min	Max	Description
Object	object			Object to compare with.

Name	Type	Min	Max	Description
object	Object			Object to compare with.

NonNull

Returns true if the WavefrontExporter object is valid. (Inherited from Object)

PrintInfo

Prints the content/info of the WavefrontExporter object to the log. (Inherited from Object)

RemoveObserver

Removes a previously added observer object. (Inherited from Object)

Type	Name	Min	Max	Description
`rid`	observerId			ObserverId is the id returned by AddObserver when the observer was added.

Type	Name	Min	Max	Description
`int`	observerId			ObserverId is the id returned by AddObserver when the observer was added.

Name	Type	Min	Max	Description
observerId	`int`			ObserverId is the id returned by AddObserver when the observer was added.

Run

Runs the export. Note that all parameters must be setup before importing.

Syntax

cpp

Simplygon::EErrorCodes Run() const;

Parameters

Run takes no parameters.

Return value

Type: EErrorCodes

Key	Value	Comment
NoError	0	No error, the initialization or process has finished, and with no errors
NoLicense	-1	no license was found (or licence expired)
NotInitialized	-2	the SDK is not initialized, or no process object has been loaded/created
AlreadyInitialized	-3	the SDK is already initialized
DLLOrDependenciesNotFound	-4	the specified file was not found. This might also mean that a .dll cannot be loaded because there is a missing dependency, such as the runtime environment.
InvalidInputParam	-5	an invalid parameter was passed to the method
FailedTesting	-6	the reduction failed post-testing
DLLAndHeaderFileIsNotMatching	-7	the Simplygon DLL and header file interface versions do not match
DLLFailedToLoad	-8	the Simplygon DLL failed loading, probably because of a missing dependency
LicenseNotForThisApplication	-9	the license is not made for this application of Simplygon
LicenseNotForThisPlatform	-10	the license is not made for this platform of Simplygon
LicenseNotForThisVersion	-11	the license is not made for this version of Simplygon
FailedToCreatePipelineSerializer	-12	failed to create pipeline serializer
FailedToRunPipeline	-13	failed to run pipeline
UnhandledException	-14	an unhandled exception was encountered
FileError	-15	a file read/write failed.
InvalidPath	-16	a path is invalid or a file/directory is missing.
DependencyMissing	-17	a needed dependency is missing. see log for info on what is missing.
UnexpectedError	-18	an unexpected error happened.
FailedToUploadFreeLicenseAsset	-50	failed to upload free license asset
ExceptionalError	-1000	An exceptional and fatal error occurred, and has been reported to the error handler. The library is placed in an exceptional state, and you should unload and reload the Simplygon library to avoid memory leaks.
FailedToResolveLicenseServerHostName	-10001	cannot reach the licensing server, cant look up server, check DNS
FailedToConnectToLicenseServer	-10002	cannot contact the licensing server, check firewall/proxy server
FailedToConnectToLicenseServerAndSendData	-10003	Failed to connect to the license server. Please check that your internet connection is working and outgoing connections to license.simplygon.com port 443 are not blocked by a firewall or proxy.
FailedToConnectToLicenseServerAndReceiveData	-10004	cannot receive data from the licensing server, check firewall/proxy server
DataFromLicenseServerIsCorrupt	-10005	data from licensing server is corrupted, try again, check connection
LicenseHasExpired	-10006	the license has expired
LicenseIsInvalid	-10007	the license data is corrupted, please reinstall the license key
LicenseNotForThisProduct	-10008	the license is not for this product, please contact licensing, and replace license key
NoNetworkCardFound	-10009	no network card was found on the machine
LicenseDecodeFailed	-10010	could not decode license, it is corrupted
LicenseLockNotMatchingMachine	-10011	the license is locked to another machine
ConnectionToLicenseServerLost	-10012	Connection to license server lost
LicenseHashDataCorrupt	-10013	could not decode license, it is corrupted
LicenseExpired	-10014	the license is invalid, please contact licensing
LicenseNotLockedForThisMachine	-10020	the license is locked to another machine
YourLicenseRequiresLatestWindows10	-10024	your license requires latest Windows 10 version
LicenseServerReturnedBadRequest	-10400	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingCap	-10403	You have reached the maximum number of processings for your license. Please try again in 24 hours or reach out to SimplygonSales@microsoft.com for support..
UnknownLicenseKey	-10404	You are using an unknown license key. Please verify so you typed in the license key correctly and try again
LicenseIsNotActive	-10410	You are using an inactive license key. Please reach out to SimplygonSales[at]microsoft.com for support
MaxNodesReachForThisLicense	-10409	You have reached the maximum number of nodes for your license. After 48 hours of not using Simplygon on a machine the license will be released and can be installed on another machine
YourLicenseRequiresLatestSimplygon	-10426	The license key you are using requires you to update to the latest version before you can use Simplygon
LicenseServerReturnServerError	-10501	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingValidationError	-20001	The process was aborted, because of a validation error. Either the process settings or the input data was invalid, or a combination thereof. Use GetErrorMessages in the main Simplygon object to retrieve error messages, and see the log for details. Note that the library is not left in an exceptional state, and it is safe to continue processing other scenes.

Syntax

csharp

EErrorCodes Run();

Parameters

Run takes no parameters.

Return value

Type: EErrorCodes

Key	Value	Comment
NoError	0	No error, the initialization or process has finished, and with no errors
NoLicense	-1	no license was found (or licence expired)
NotInitialized	-2	the SDK is not initialized, or no process object has been loaded/created
AlreadyInitialized	-3	the SDK is already initialized
DLLOrDependenciesNotFound	-4	the specified file was not found. This might also mean that a .dll cannot be loaded because there is a missing dependency, such as the runtime environment.
InvalidInputParam	-5	an invalid parameter was passed to the method
FailedTesting	-6	the reduction failed post-testing
DLLAndHeaderFileIsNotMatching	-7	the Simplygon DLL and header file interface versions do not match
DLLFailedToLoad	-8	the Simplygon DLL failed loading, probably because of a missing dependency
LicenseNotForThisApplication	-9	the license is not made for this application of Simplygon
LicenseNotForThisPlatform	-10	the license is not made for this platform of Simplygon
LicenseNotForThisVersion	-11	the license is not made for this version of Simplygon
FailedToCreatePipelineSerializer	-12	failed to create pipeline serializer
FailedToRunPipeline	-13	failed to run pipeline
UnhandledException	-14	an unhandled exception was encountered
FileError	-15	a file read/write failed.
InvalidPath	-16	a path is invalid or a file/directory is missing.
DependencyMissing	-17	a needed dependency is missing. see log for info on what is missing.
UnexpectedError	-18	an unexpected error happened.
FailedToUploadFreeLicenseAsset	-50	failed to upload free license asset
ExceptionalError	-1000	An exceptional and fatal error occurred, and has been reported to the error handler. The library is placed in an exceptional state, and you should unload and reload the Simplygon library to avoid memory leaks.
FailedToResolveLicenseServerHostName	-10001	cannot reach the licensing server, cant look up server, check DNS
FailedToConnectToLicenseServer	-10002	cannot contact the licensing server, check firewall/proxy server
FailedToConnectToLicenseServerAndSendData	-10003	Failed to connect to the license server. Please check that your internet connection is working and outgoing connections to license.simplygon.com port 443 are not blocked by a firewall or proxy.
FailedToConnectToLicenseServerAndReceiveData	-10004	cannot receive data from the licensing server, check firewall/proxy server
DataFromLicenseServerIsCorrupt	-10005	data from licensing server is corrupted, try again, check connection
LicenseHasExpired	-10006	the license has expired
LicenseIsInvalid	-10007	the license data is corrupted, please reinstall the license key
LicenseNotForThisProduct	-10008	the license is not for this product, please contact licensing, and replace license key
NoNetworkCardFound	-10009	no network card was found on the machine
LicenseDecodeFailed	-10010	could not decode license, it is corrupted
LicenseLockNotMatchingMachine	-10011	the license is locked to another machine
ConnectionToLicenseServerLost	-10012	Connection to license server lost
LicenseHashDataCorrupt	-10013	could not decode license, it is corrupted
LicenseExpired	-10014	the license is invalid, please contact licensing
LicenseNotLockedForThisMachine	-10020	the license is locked to another machine
YourLicenseRequiresLatestWindows10	-10024	your license requires latest Windows 10 version
LicenseServerReturnedBadRequest	-10400	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingCap	-10403	You have reached the maximum number of processings for your license. Please try again in 24 hours or reach out to SimplygonSales@microsoft.com for support..
UnknownLicenseKey	-10404	You are using an unknown license key. Please verify so you typed in the license key correctly and try again
LicenseIsNotActive	-10410	You are using an inactive license key. Please reach out to SimplygonSales[at]microsoft.com for support
MaxNodesReachForThisLicense	-10409	You have reached the maximum number of nodes for your license. After 48 hours of not using Simplygon on a machine the license will be released and can be installed on another machine
YourLicenseRequiresLatestSimplygon	-10426	The license key you are using requires you to update to the latest version before you can use Simplygon
LicenseServerReturnServerError	-10501	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
ProcessingValidationError	-20001	The process was aborted, because of a validation error. Either the process settings or the input data was invalid, or a combination thereof. Use GetErrorMessages in the main Simplygon object to retrieve error messages, and see the log for details. Note that the library is not left in an exceptional state, and it is safe to continue processing other scenes.

Syntax

python

EErrorCodes_* Run()

Parameters

Run takes no parameters.

Return value

Type: EErrorCodes

Key	Value	Comment
EErrorCodes_NoError	0	No error, the initialization or process has finished, and with no errors
EErrorCodes_NoLicense	-1	no license was found (or licence expired)
EErrorCodes_NotInitialized	-2	the SDK is not initialized, or no process object has been loaded/created
EErrorCodes_AlreadyInitialized	-3	the SDK is already initialized
EErrorCodes_DLLOrDependenciesNotFound	-4	the specified file was not found. This might also mean that a .dll cannot be loaded because there is a missing dependency, such as the runtime environment.
EErrorCodes_InvalidInputParam	-5	an invalid parameter was passed to the method
EErrorCodes_FailedTesting	-6	the reduction failed post-testing
EErrorCodes_DLLAndHeaderFileIsNotMatching	-7	the Simplygon DLL and header file interface versions do not match
EErrorCodes_DLLFailedToLoad	-8	the Simplygon DLL failed loading, probably because of a missing dependency
EErrorCodes_LicenseNotForThisApplication	-9	the license is not made for this application of Simplygon
EErrorCodes_LicenseNotForThisPlatform	-10	the license is not made for this platform of Simplygon
EErrorCodes_LicenseNotForThisVersion	-11	the license is not made for this version of Simplygon
EErrorCodes_FailedToCreatePipelineSerializer	-12	failed to create pipeline serializer
EErrorCodes_FailedToRunPipeline	-13	failed to run pipeline
EErrorCodes_UnhandledException	-14	an unhandled exception was encountered
EErrorCodes_FileError	-15	a file read/write failed.
EErrorCodes_InvalidPath	-16	a path is invalid or a file/directory is missing.
EErrorCodes_DependencyMissing	-17	a needed dependency is missing. see log for info on what is missing.
EErrorCodes_UnexpectedError	-18	an unexpected error happened.
EErrorCodes_FailedToUploadFreeLicenseAsset	-50	failed to upload free license asset
EErrorCodes_ExceptionalError	-1000	An exceptional and fatal error occurred, and has been reported to the error handler. The library is placed in an exceptional state, and you should unload and reload the Simplygon library to avoid memory leaks.
EErrorCodes_FailedToResolveLicenseServerHostName	-10001	cannot reach the licensing server, cant look up server, check DNS
EErrorCodes_FailedToConnectToLicenseServer	-10002	cannot contact the licensing server, check firewall/proxy server
EErrorCodes_FailedToConnectToLicenseServerAndSendData	-10003	Failed to connect to the license server. Please check that your internet connection is working and outgoing connections to license.simplygon.com port 443 are not blocked by a firewall or proxy.
EErrorCodes_FailedToConnectToLicenseServerAndReceiveData	-10004	cannot receive data from the licensing server, check firewall/proxy server
EErrorCodes_DataFromLicenseServerIsCorrupt	-10005	data from licensing server is corrupted, try again, check connection
EErrorCodes_LicenseHasExpired	-10006	the license has expired
EErrorCodes_LicenseIsInvalid	-10007	the license data is corrupted, please reinstall the license key
EErrorCodes_LicenseNotForThisProduct	-10008	the license is not for this product, please contact licensing, and replace license key
EErrorCodes_NoNetworkCardFound	-10009	no network card was found on the machine
EErrorCodes_LicenseDecodeFailed	-10010	could not decode license, it is corrupted
EErrorCodes_LicenseLockNotMatchingMachine	-10011	the license is locked to another machine
EErrorCodes_ConnectionToLicenseServerLost	-10012	Connection to license server lost
EErrorCodes_LicenseHashDataCorrupt	-10013	could not decode license, it is corrupted
EErrorCodes_LicenseExpired	-10014	the license is invalid, please contact licensing
EErrorCodes_LicenseNotLockedForThisMachine	-10020	the license is locked to another machine
EErrorCodes_YourLicenseRequiresLatestWindows10	-10024	your license requires latest Windows 10 version
EErrorCodes_LicenseServerReturnedBadRequest	-10400	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
EErrorCodes_ProcessingCap	-10403	You have reached the maximum number of processings for your license. Please try again in 24 hours or reach out to SimplygonSales@microsoft.com for support..
EErrorCodes_UnknownLicenseKey	-10404	You are using an unknown license key. Please verify so you typed in the license key correctly and try again
EErrorCodes_LicenseIsNotActive	-10410	You are using an inactive license key. Please reach out to SimplygonSales[at]microsoft.com for support
EErrorCodes_MaxNodesReachForThisLicense	-10409	You have reached the maximum number of nodes for your license. After 48 hours of not using Simplygon on a machine the license will be released and can be installed on another machine
EErrorCodes_YourLicenseRequiresLatestSimplygon	-10426	The license key you are using requires you to update to the latest version before you can use Simplygon
EErrorCodes_LicenseServerReturnServerError	-10501	Bad license request. Please reach out to SimplygonSupport[at]microsoft.com for support
EErrorCodes_ProcessingValidationError	-20001	The process was aborted, because of a validation error. Either the process settings or the input data was invalid, or a combination thereof. Use GetErrorMessages in the main Simplygon object to retrieve error messages, and see the log for details. Note that the library is not left in an exceptional state, and it is safe to continue processing other scenes.

SetScene

The scene to export.

Type	Name	Min	Max	Description
Scene	scene			The desired scene object.

Type	Name	Min	Max	Description
Scene	scene			The desired scene object.

Name	Type	Min	Max	Description
scene	Scene			The desired scene object.

SetSelectionSet

The selection set (of nodes from the scene) to export.

Type	Name	Min	Max	Description
`int`	exportSelectionSetID			The desired selection set id to use.

Type	Name	Min	Max	Description
`int`	exportSelectionSetID			The desired selection set id to use.

Name	Type	Min	Max	Description
exportSelectionSetID	`int`			The desired selection set id to use.

Static methods details

IsClassA

Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)

Type	Name	Min	Max	Description
`const char *`	type			Name of the class to check if the class is, or is a descendant of.

Type	Name	Min	Max	Description
`string`	type			Name of the class to check if the class is, or is a descendant of.

SafeCast

SafeCast makes sure the input object is of a class that can be cast into spWavefrontExporter, and if this is the case, returns the object cast into spWavefrontExporter. (Inherited from Object)

Material casters

Array

ObjectCollection

Table

GraphicsExporter

GraphicsImporter

ShaderParameter

Pipeline

ProcessingObject

SettingsObject

SceneNode

ShadingNode

class WavefrontExporter ​

Properties ​

Methods ​

Static methods ​

Properties details ​

ExportCascadedScenes ​

ExportFilePath ​

ForceTriangleExport ​

MaterialFilePath ​

Name ​

PrimaryTexCoordName ​

ReferenceExportMode ​

Methods details ​

AddObserver ​

GetClass ​

IsA ​

`class` WavefrontExporter

Properties

Methods

Static methods

Properties details

ExportCascadedScenes

ExportFilePath

ForceTriangleExport

MaterialFilePath

Name

PrimaryTexCoordName

ReferenceExportMode

Methods details

AddObserver

GetClass

IsA