Skip to content
On this page

class BillboardCloudSettings

Settings for the ImpostorType: BillboardCloud

Properties

PropertyDescription
BillboardDensityDetermines how many billboards to create. A large BillboardDensity means that more billboards will be created to represent spatially spread out triangles better. Having a low BillboardDensity means that fewer billboards will be created and the distances from original leaves to billboards will get larger. The range is 0->1.
BillboardModeSpecifies how the impostors should be mapped to the scene.
FavorVerticalPlanesDetermines whether to prioritize generating vertical billboards which means they will be optimized to be viewed from the side. Otherwise, if the geometry in the input scene is mostly facing upwards/downwards then the generated billboards will also be facing upwards/downwards which makes them not well suited to being viewed from the side.
GeometricComplexityDetermines the geometric complexity of the billboards. The value range is 0->1, where a value of Zero means that the billboards will be simple and not follow the projection closely. And a value of One means that the geometric complexity will be increased and follow the projection closely.
MaxPlaneCountDetermines the maximum amount of planes that are computed for the scene initially. When this criteria is met, it is not guaranteed that all triangles in the scene have been accurately mapped to a billboard. It is not a definite hard limit on the number of billboards because the planes can be split up into multiple planes when they're being cut to match their projections. For instance: if GeometricComplexity is high and there are two completely separated projections on a billboard, then the billboard will be split up into two billboards.
NameThe name of the BillboardCloudSettings object. (Inherited from Object)
TwoSidedOnly applicable if BillboardMode: Foliage. Determines if the scene is intended to be viewed from both sides without back face culling.
UpVectorThe UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.
UpVectorXThe UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.
UpVectorYThe UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.
UpVectorZThe UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.
UseVisibilityWeightsDetermines whether to prioritize accurately mapping triangles with higher visibility to billboards.

Methods

MethodDescription
AddObserverAdds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
GetBoolParameterGet a named parameter boolean value. (Inherited from SettingsObject)
GetClassGet the name of the BillboardCloudSettings class. (Inherited from Object)
GetDoubleParameterGet a named parameter floating point value. (Inherited from SettingsObject)
GetErrorStringReturns a string describing the error that was found the last time ValidateSettings was performed. (Inherited from SettingsObject)
GetFoliageSettingsSettings for foliage when BillboardMode is Foliage.
GetIntParameterGet a named parameter integer value. (Inherited from SettingsObject)
GetStringParameterGet a named parameter string value. (Inherited from SettingsObject)
GetUIntParameterGet a named parameter unsigned integer value. (Inherited from SettingsObject)
IsAReturns true if BillboardCloudSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNullReturns true if the BillboardCloudSettings object is invalid. (Inherited from Object)
IsSameObjectAsReturns true if the BillboardCloudSettings object is valid. (Inherited from Object)
NonNullReturns true if the BillboardCloudSettings object is valid. (Inherited from Object)
PrintInfoPrints the content/info of the BillboardCloudSettings object to the log. (Inherited from Object)
RemoveObserverRemoves a previously added observer object. (Inherited from Object)
SetBoolParameterSet a named parameter boolean value. (Inherited from SettingsObject)
SetDoubleParameterSet a named parameter floating point value. (Inherited from SettingsObject)
SetIntParameterSet a named parameter integer value. (Inherited from SettingsObject)
SetStringParameterSet a named parameter string value. (Inherited from SettingsObject)
SetUIntParameterSet a named parameter unsigned integer value. (Inherited from SettingsObject)
SetValidateParameterNamesSet if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled. (Inherited from SettingsObject)
ToJSONGet settings as JSON for debugging purposes. (Inherited from SettingsObject)
ValidateSettingsValidates the current settings values. (Inherited from SettingsObject)

Static methods

MethodDescription
IsClassAReturns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCastSafeCast makes sure the input object is of a class that can be cast into spBillboardCloudSettings, and if this is the case, returns the object cast into spBillboardCloudSettings. (Inherited from Object)

Properties details

BillboardDensity

Determines how many billboards to create. A large BillboardDensity means that more billboards will be created to represent spatially spread out triangles better. Having a low BillboardDensity means that fewer billboards will be created and the distances from original leaves to billboards will get larger. The range is 0->1.

BillboardMode

Specifies how the impostors should be mapped to the scene.

FavorVerticalPlanes

Determines whether to prioritize generating vertical billboards which means they will be optimized to be viewed from the side. Otherwise, if the geometry in the input scene is mostly facing upwards/downwards then the generated billboards will also be facing upwards/downwards which makes them not well suited to being viewed from the side.

GeometricComplexity

Determines the geometric complexity of the billboards. The value range is 0->1, where a value of Zero means that the billboards will be simple and not follow the projection closely. And a value of One means that the geometric complexity will be increased and follow the projection closely.

MaxPlaneCount

Determines the maximum amount of planes that are computed for the scene initially. When this criteria is met, it is not guaranteed that all triangles in the scene have been accurately mapped to a billboard. It is not a definite hard limit on the number of billboards because the planes can be split up into multiple planes when they're being cut to match their projections. For instance: if GeometricComplexity is high and there are two completely separated projections on a billboard, then the billboard will be split up into two billboards.

Name

The name of the BillboardCloudSettings object. (Inherited from Object)

TwoSided

Only applicable if BillboardMode: Foliage. Determines if the scene is intended to be viewed from both sides without back face culling.

UpVector

The UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.

UpVectorX

The UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.

UpVectorY

The UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.

UpVectorZ

The UpVector used in the Billboard Cloud Processor. Set this if the input scene has an up vector other than Y+. If FavorVerticalPlanes is enabled, the UpVector determines verticality.

UseVisibilityWeights

Determines whether to prioritize accurately mapping triangles with higher visibility to billboards.

Methods details

AddObserver

Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)

GetBoolParameter

Get a named parameter boolean value.

GetClass

Get the name of the BillboardCloudSettings class. (Inherited from Object)

GetDoubleParameter

Get a named parameter floating point value.

GetErrorString

Returns a string describing the error that was found the last time ValidateSettings was performed.

GetFoliageSettings

Settings for foliage when BillboardMode is Foliage.

GetIntParameter

Get a named parameter integer value.

GetStringParameter

Get a named parameter string value.

GetUIntParameter

Get a named parameter unsigned integer value.

IsA

Returns true if BillboardCloudSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)

IsNull

Returns true if the BillboardCloudSettings object is invalid. (Inherited from Object)

IsSameObjectAs

Returns true if the BillboardCloudSettings object is valid. (Inherited from Object)

NonNull

Returns true if the BillboardCloudSettings object is valid. (Inherited from Object)

PrintInfo

Prints the content/info of the BillboardCloudSettings object to the log. (Inherited from Object)

RemoveObserver

Removes a previously added observer object. (Inherited from Object)

SetBoolParameter

Set a named parameter boolean value.

SetDoubleParameter

Set a named parameter floating point value.

SetIntParameter

Set a named parameter integer value.

SetStringParameter

Set a named parameter string value.

SetUIntParameter

Set a named parameter unsigned integer value.

SetValidateParameterNames

Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled.

ToJSON

Get settings as JSON for debugging purposes.

ValidateSettings

Validates the current settings values.

Static methods details

IsClassA

Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)

SafeCast

SafeCast makes sure the input object is of a class that can be cast into spBillboardCloudSettings, and if this is the case, returns the object cast into spBillboardCloudSettings. (Inherited from Object)