Skip to content
On this page

class GeometryDataCasterSettings

GeometryDataCasterSettings is the interface used to manage settings for GeometryDataCaster

Properties

PropertyDescription
DilationThe Dilation value. Where applicable, such as colors and normals, the caster will fill empty pixels surrounding filled pixels with values mixed from the filled ones. This setting sets how many pixels to fill outside the original filled pixels. (Inherited from MaterialCasterSettings)
DitherTypeThe type of dithering to use when creating the output object. (Inherited from MaterialCasterSettings)
FillModeThe fill mode determines what to do with the pixels that remain unfilled after both the casting and dilation has been performed. Options are: NoFill = Do not fill remaining pixels Interpolate = linearly interpolate the closest samples NearestNeighbor = use the closest available pixel value without interpolation. (Inherited from MaterialCasterSettings)
GeometryDataFieldIndexThe GeometryDataFieldIndex setting, which specifies what field index to cast in the GeometryDataCaster, for fields where it is applicable (TexCoords, Tangents, Bitangents and Colors). The setting is ignored for other field types.
GeometryDataFieldTypeThe GeometryDataFieldType setting, which specifies what field type to cast in the GeometryDataCaster.
MappingInfThe inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingInfAProperty the inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingInfBThe inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingInfGThe inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingInfRThe inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingLayerIndexThe MappingLayerIndex setting, which specifies the layer of the mapping image to use for mapping the geometry data. This is useful eg if you have decals which are on layer 0, and the real geometry on layer 1
MappingSupThe Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingSupAProperty the Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingSupBThe Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingSupGThe Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MappingSupRThe Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.
MaterialChannelThe name of the input material channel to cast. Existing user channels of any arbitrary name in the input materials can be cast. (Inherited from MaterialCasterSettings)
NameThe name of the GeometryDataCasterSettings object. (Inherited from Object)
OpacityChannelThe name of the input opacity channel to use for combining layers in most casters and casting opacity in the opacitycaster. User channels of any arbitrary name can be used. If the caster is run through a Pipeline object, the OpacityChannel set here will also be set as the output materials OpacityChannel property. (Inherited from MaterialCasterSettings)
OpacityChannelComponentThe component in the opacity channel to use as opacity value. (Inherited from MaterialCasterSettings)
OutputDDSCompressionTypeDDS compression if output format is DDS. (Inherited from MaterialCasterSettings)
OutputImageFileFormatFile format for output texture. (Inherited from MaterialCasterSettings)
OutputPixelFormatThe output pixel format (Inherited from MaterialCasterSettings)
UseMultisamplingEnable or disable multisampling. (Inherited from MaterialCasterSettings)

Methods

MethodDescription
AddObserverAdds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)
GetBoolParameterGet a named parameter boolean value. (Inherited from SettingsObject)
GetClassGet the name of the GeometryDataCasterSettings class. (Inherited from Object)
GetDoubleParameterGet a named parameter floating point value. (Inherited from SettingsObject)
GetErrorStringReturns a string describing the error that was found the last time ValidateSettings was performed. (Inherited from SettingsObject)
GetIntParameterGet a named parameter integer value. (Inherited from SettingsObject)
GetStringParameterGet a named parameter string value. (Inherited from SettingsObject)
GetUIntParameterGet a named parameter unsigned integer value. (Inherited from SettingsObject)
IsAReturns true if GeometryDataCasterSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)
IsNullReturns true if the GeometryDataCasterSettings object is invalid. (Inherited from Object)
IsSameObjectAsReturns true if the GeometryDataCasterSettings object is valid. (Inherited from Object)
NonNullReturns true if the GeometryDataCasterSettings object is valid. (Inherited from Object)
PrintInfoPrints the content/info of the GeometryDataCasterSettings object to the log. (Inherited from Object)
RemoveObserverRemoves a previously added observer object. (Inherited from Object)
SetBoolParameterSet a named parameter boolean value. (Inherited from SettingsObject)
SetDoubleParameterSet a named parameter floating point value. (Inherited from SettingsObject)
SetIntParameterSet a named parameter integer value. (Inherited from SettingsObject)
SetStringParameterSet a named parameter string value. (Inherited from SettingsObject)
SetUIntParameterSet a named parameter unsigned integer value. (Inherited from SettingsObject)
SetValidateParameterNamesSet if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled. (Inherited from SettingsObject)
ToJSONGet settings as JSON for debugging purposes. (Inherited from SettingsObject)
ValidateSettingsValidates the current settings values. (Inherited from SettingsObject)

Static methods

MethodDescription
IsClassAReturns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)
SafeCastSafeCast makes sure the input object is of a class that can be cast into spGeometryDataCasterSettings, and if this is the case, returns the object cast into spGeometryDataCasterSettings. (Inherited from Object)

Properties details

Dilation

The Dilation value. Where applicable, such as colors and normals, the caster will fill empty pixels surrounding filled pixels with values mixed from the filled ones. This setting sets how many pixels to fill outside the original filled pixels.

DitherType

The type of dithering to use when creating the output object.

FillMode

The fill mode determines what to do with the pixels that remain unfilled after both the casting and dilation has been performed. Options are: NoFill = Do not fill remaining pixels Interpolate = linearly interpolate the closest samples NearestNeighbor = use the closest available pixel value without interpolation.

GeometryDataFieldIndex

The GeometryDataFieldIndex setting, which specifies what field index to cast in the GeometryDataCaster, for fields where it is applicable (TexCoords, Tangents, Bitangents and Colors). The setting is ignored for other field types.

GeometryDataFieldType

The GeometryDataFieldType setting, which specifies what field type to cast in the GeometryDataCaster.

MappingInf

The inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingInfA

Property the inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingInfB

The inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingInfG

The inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingInfR

The inferior/minimum value of field values to map onto the image data range (0->1). The minimum value will be represented by 0 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingLayerIndex

The MappingLayerIndex setting, which specifies the layer of the mapping image to use for mapping the geometry data. This is useful eg if you have decals which are on layer 0, and the real geometry on layer 1

MappingSup

The Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingSupA

Property the Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingSupB

The Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingSupG

The Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MappingSupR

The Superior/maximum value of field values to map onto the image data range (0->1). The maximum value will be represented by 1 in the image. Note that the mapping is only used for real value fields, not id-based fields, which cannot be scaled accurately.

MaterialChannel

The name of the input material channel to cast. Existing user channels of any arbitrary name in the input materials can be cast.

Name

The name of the GeometryDataCasterSettings object. (Inherited from Object)

OpacityChannel

The name of the input opacity channel to use for combining layers in most casters and casting opacity in the opacitycaster. User channels of any arbitrary name can be used. If the caster is run through a Pipeline object, the OpacityChannel set here will also be set as the output materials OpacityChannel property.

OpacityChannelComponent

The component in the opacity channel to use as opacity value.

OutputDDSCompressionType

DDS compression if output format is DDS.

OutputImageFileFormat

File format for output texture.

OutputPixelFormat

The output pixel format

UseMultisampling

Enable or disable multisampling.

Methods details

AddObserver

Adds a user-defined observer object to the interface, that will receive events from the interface. (Inherited from Object)

GetBoolParameter

Get a named parameter boolean value.

GetClass

Get the name of the GeometryDataCasterSettings class. (Inherited from Object)

GetDoubleParameter

Get a named parameter floating point value.

GetErrorString

Returns a string describing the error that was found the last time ValidateSettings was performed.

GetIntParameter

Get a named parameter integer value.

GetStringParameter

Get a named parameter string value.

GetUIntParameter

Get a named parameter unsigned integer value.

IsA

Returns true if GeometryDataCasterSettings is a or is a descendant of the class named as the type parameter. (Inherited from Object)

IsNull

Returns true if the GeometryDataCasterSettings object is invalid. (Inherited from Object)

IsSameObjectAs

Returns true if the GeometryDataCasterSettings object is valid. (Inherited from Object)

NonNull

Returns true if the GeometryDataCasterSettings object is valid. (Inherited from Object)

PrintInfo

Prints the content/info of the GeometryDataCasterSettings object to the log. (Inherited from Object)

RemoveObserver

Removes a previously added observer object. (Inherited from Object)

SetBoolParameter

Set a named parameter boolean value.

SetDoubleParameter

Set a named parameter floating point value.

SetIntParameter

Set a named parameter integer value.

SetStringParameter

Set a named parameter string value.

SetUIntParameter

Set a named parameter unsigned integer value.

SetValidateParameterNames

Set if parameter names should be validated or not. Parameters that previously do not exist will generate and error if validation is enabled and be allowed if validation is disabled.

ToJSON

Get settings as JSON for debugging purposes.

ValidateSettings

Validates the current settings values.

Static methods details

IsClassA

Returns true if the class is a or is a descendant of the class named as the type parameter. (Inherited from Object)

SafeCast

SafeCast makes sure the input object is of a class that can be cast into spGeometryDataCasterSettings, and if this is the case, returns the object cast into spGeometryDataCasterSettings. (Inherited from Object)