class BoneSettings

Settings for the Simplygon Reduction/Remeshing classes With the BoneSettings object, the user can setup all the parameters for how the BoneLOD processor should simplify the links between geometries and bones. Bones can be un-linked from the geometry either with a set ratio or depending on a selected pixel size on screen.

Properties

Property	Description
BoneReductionTargetBoneCount	The desired bone count. The range is 0->inf.
BoneReductionTargetBoneCountEnabled	Enable bone count as a reduction target. The reducer will stop when the set bone count has been reached.
BoneReductionTargetBoneRatio	The desired bone reduction ratio. The range is 0->1.
BoneReductionTargetBoneRatioEnabled	Enable bone ratio as a reduction target. The reducer will stop when the set bone-ratio has been reached.
BoneReductionTargetMaxDeviation	The MaxDeviation value, the maximum surface-deviation between the reduced geometry and the original.
BoneReductionTargetMaxDeviationEnabled	Enable max deviation as a reduction target. The reducer will stop when the set max deviation has been reached.
BoneReductionTargetOnScreenSize	The OnScreenSize value, the maximum surface-deviation between the reduced geometry and the original.
BoneReductionTargetOnScreenSizeEnabled	Enable on screen size as a reduction target. The reducer will stop when the set on screen size has been reached.
BoneReductionTargetStopCondition	The stop condition for the bone reducer. Any: the reducer will stop when any single one of the set reduction targets have been reached. All: the reducer will stop when all enabled reduction targets have been set.
LimitBonesPerVertex	Decides whether unused bones should be removed.
LockBoneSelectionSetID	The ID of the selection set that contains all of the bones that will be locked, and cannot be removed in the BoneLOD process. If a bone is locked, all its ancestors will be locked also. If the ID is -1, then no bones are selected.
LockBoneSelectionSetName	The name of the selection set that contains all of the bones that will be locked, and cannot be removed in the BoneLOD process. If a bone is locked, all its ancestors will be locked also. If both name and id are set for the locked selection set, the name will be used.
MaxBonePerVertex	Decides the maximum limit of how many bones can be connected to each vertex. If for example set to 1, then each vertex will only be linked to 1 bone.
RemoveBoneSelectionSetID	The ID of the selection set that contains all of the bones that will be forced to be removed in the BoneLOD process, UNLESS they are locked. If a bone is set to be removed, all its descendants will be removed also. If both name and id are set for the remove selection set, the name will be used.
RemoveBoneSelectionSetName	The name of the selection set that contains all of the bones that will be forced to be removed in the BoneLOD process, UNLESS they are locked. If a bone is set to be removed, all its descendants will be removed also. If both name and id are set for the remove selection set, the name will be used.
RemoveUnusedBones	Decides whether unused bones should be removed.
UseBoneReducer	Enables or disables the bone reduction processing that actually removes bones. Even with this flag off, the bones per vertex can still be limited.

Methods

Method	Description
GetBoolParameter	Get a named parameter boolean value.
GetClass	Get the name of the BoneSettings class.
GetDoubleParameter	Get a named parameter floating point value.
GetErrorString	Returns a string describing the error that was found the last time ValidateSettings was performed.
GetIntParameter	Get a named parameter integer value.
GetStringParameter	Get a named parameter string value.
GetUIntParameter	Get a named parameter unsigned integer value.
IsA	Returns true if BoneSettings is a or is a descendant of the class named as the type parameter.
IsNull	Returns true if the BoneSettings object is invalid.
SetBoneReductionTargets	Set bone reduction targets and stop condition used in the bone reduction.
SetBoolParameter	Set a named parameter boolean value.
SetDoubleParameter	Set a named parameter floating point value.
SetIntParameter	Set a named parameter integer value.
SetStringParameter	Set a named parameter string value.
SetUIntParameter	Set a named parameter unsigned integer value.
ToJSON	Get settings as JSON for debugging purposes.
ValidateSettings	Validates the current settings values.

Static methods

Method	Description
IsClassA	Returns true if the class is a or is a descendant of the class named as the type parameter.
SafeCast	SafeCast makes sure the input object is of a class that can be cast into spBoneSettings, and if this is the case, returns the object cast into spBoneSettings.

Properties details

BoneReductionTargetBoneCount

The desired bone count. The range is 0->inf.

Syntax

// Setter
void SetBoneReductionTargetBoneCount( unsigned int value );

// Getter
unsigned int GetBoneReductionTargetBoneCount();

SetBoneReductionTargetBoneCount parameters

Type	Name	Min	Max	Description
unsigned int	value	0	UINT_MAX	The value to which BoneCount will be set.

GetBoneReductionTargetBoneCount return value

Type: unsigned int

Default: 100

Syntax

// Setter
void SetBoneReductionTargetBoneCount(uint value);

// Getter
uint GetBoneReductionTargetBoneCount();

SetBoneReductionTargetBoneCount parameters

Type	Name	Min	Max	Description
uint	value	0	UINT_MAX	The value to which BoneCount will be set.

GetBoneReductionTargetBoneCount return value

Type: uint

Default: 100

Syntax

# Setter
None SetBoneReductionTargetBoneCount(value: int)

# Getter
int GetBoneReductionTargetBoneCount()

SetBoneReductionTargetBoneCount parameters

Name	Type	Min	Max	Description
value	int	0	UINT_MAX	The value to which BoneCount will be set.

GetBoneReductionTargetBoneCount return value

Type: int

Default: 100

BoneReductionTargetBoneCountEnabled

Enable bone count as a reduction target. The reducer will stop when the set bone count has been reached.

Syntax

// Setter
void SetBoneReductionTargetBoneCountEnabled( bool value );

// Getter
bool GetBoneReductionTargetBoneCountEnabled();

SetBoneReductionTargetBoneCountEnabled parameters

Type	Name	Min	Max	Description
bool	value			The desired value of BoneCountEnabled.

GetBoneReductionTargetBoneCountEnabled return value

Type: bool

Default: false

Syntax

// Setter
void SetBoneReductionTargetBoneCountEnabled(bool value);

// Getter
bool GetBoneReductionTargetBoneCountEnabled();

SetBoneReductionTargetBoneCountEnabled parameters

Type	Name	Min	Max	Description
bool	value			The desired value of BoneCountEnabled.

GetBoneReductionTargetBoneCountEnabled return value

Type: bool

Default: false

Syntax

# Setter
None SetBoneReductionTargetBoneCountEnabled(value: bool)

# Getter
bool GetBoneReductionTargetBoneCountEnabled()

SetBoneReductionTargetBoneCountEnabled parameters

Name	Type	Min	Max	Description
value	bool			The desired value of BoneCountEnabled.

GetBoneReductionTargetBoneCountEnabled return value

Type: bool

Default: false

BoneReductionTargetBoneRatio

The desired bone reduction ratio. The range is 0->1.

Syntax

// Setter
void SetBoneReductionTargetBoneRatio( real value );

// Getter
real GetBoneReductionTargetBoneRatio();

SetBoneReductionTargetBoneRatio parameters

Type	Name	Min	Max	Description
real	value	0	1	The value to which ReductionRatio will be set.

GetBoneReductionTargetBoneRatio return value

Type: real

Default: 0.5

Syntax

// Setter
void SetBoneReductionTargetBoneRatio(float value);

// Getter
float GetBoneReductionTargetBoneRatio();

SetBoneReductionTargetBoneRatio parameters

Type	Name	Min	Max	Description
float	value	0	1	The value to which ReductionRatio will be set.

GetBoneReductionTargetBoneRatio return value

Type: float

Default: 0.5

Syntax

# Setter
None SetBoneReductionTargetBoneRatio(value: float)

# Getter
float GetBoneReductionTargetBoneRatio()

SetBoneReductionTargetBoneRatio parameters

Name	Type	Min	Max	Description
value	float	0	1	The value to which ReductionRatio will be set.

GetBoneReductionTargetBoneRatio return value

Type: float

Default: 0.5

BoneReductionTargetBoneRatioEnabled

Enable bone ratio as a reduction target. The reducer will stop when the set bone-ratio has been reached.

Syntax

// Setter
void SetBoneReductionTargetBoneRatioEnabled( bool value );

// Getter
bool GetBoneReductionTargetBoneRatioEnabled();

SetBoneReductionTargetBoneRatioEnabled parameters

Type	Name	Min	Max	Description
bool	value			The desired value of BoneRatioEnabled.

GetBoneReductionTargetBoneRatioEnabled return value

Type: bool

Default: true

Syntax

// Setter
void SetBoneReductionTargetBoneRatioEnabled(bool value);

// Getter
bool GetBoneReductionTargetBoneRatioEnabled();

SetBoneReductionTargetBoneRatioEnabled parameters

Type	Name	Min	Max	Description
bool	value			The desired value of BoneRatioEnabled.

GetBoneReductionTargetBoneRatioEnabled return value

Type: bool

Default: true

Syntax

# Setter
None SetBoneReductionTargetBoneRatioEnabled(value: bool)

# Getter
bool GetBoneReductionTargetBoneRatioEnabled()

SetBoneReductionTargetBoneRatioEnabled parameters

Name	Type	Min	Max	Description
value	bool			The desired value of BoneRatioEnabled.

GetBoneReductionTargetBoneRatioEnabled return value

Type: bool

Default: true

BoneReductionTargetMaxDeviation

The MaxDeviation value, the maximum surface-deviation between the reduced geometry and the original.

Syntax

// Setter
void SetBoneReductionTargetMaxDeviation( real value );

// Getter
real GetBoneReductionTargetMaxDeviation();

SetBoneReductionTargetMaxDeviation parameters

Type	Name	Min	Max	Description
real	value	0	REAL_MAX	The value to which MaxDeviation will be set.

GetBoneReductionTargetMaxDeviation return value

Type: real

Default: 0.0

Syntax

// Setter
void SetBoneReductionTargetMaxDeviation(float value);

// Getter
float GetBoneReductionTargetMaxDeviation();

SetBoneReductionTargetMaxDeviation parameters

Type	Name	Min	Max	Description
float	value	0	REAL_MAX	The value to which MaxDeviation will be set.

GetBoneReductionTargetMaxDeviation return value

Type: float

Default: 0.0

Syntax

# Setter
None SetBoneReductionTargetMaxDeviation(value: float)

# Getter
float GetBoneReductionTargetMaxDeviation()

SetBoneReductionTargetMaxDeviation parameters

Name	Type	Min	Max	Description
value	float	0	REAL_MAX	The value to which MaxDeviation will be set.

GetBoneReductionTargetMaxDeviation return value

Type: float

Default: 0.0

BoneReductionTargetMaxDeviationEnabled

Enable max deviation as a reduction target. The reducer will stop when the set max deviation has been reached.

Syntax

// Setter
void SetBoneReductionTargetMaxDeviationEnabled( bool value );

// Getter
bool GetBoneReductionTargetMaxDeviationEnabled();

SetBoneReductionTargetMaxDeviationEnabled parameters

Type	Name	Min	Max	Description
bool	value			The desired value of MaxDeviationEnabled.

GetBoneReductionTargetMaxDeviationEnabled return value

Type: bool

Default: false

Syntax

// Setter
void SetBoneReductionTargetMaxDeviationEnabled(bool value);

// Getter
bool GetBoneReductionTargetMaxDeviationEnabled();

SetBoneReductionTargetMaxDeviationEnabled parameters

Type	Name	Min	Max	Description
bool	value			The desired value of MaxDeviationEnabled.

GetBoneReductionTargetMaxDeviationEnabled return value

Type: bool

Default: false

Syntax

# Setter
None SetBoneReductionTargetMaxDeviationEnabled(value: bool)

# Getter
bool GetBoneReductionTargetMaxDeviationEnabled()

SetBoneReductionTargetMaxDeviationEnabled parameters

Name	Type	Min	Max	Description
value	bool			The desired value of MaxDeviationEnabled.

GetBoneReductionTargetMaxDeviationEnabled return value

Type: bool

Default: false

BoneReductionTargetOnScreenSize

The OnScreenSize value, the maximum surface-deviation between the reduced geometry and the original.

Syntax

// Setter
void SetBoneReductionTargetOnScreenSize( unsigned int value );

// Getter
unsigned int GetBoneReductionTargetOnScreenSize();

SetBoneReductionTargetOnScreenSize parameters

Type	Name	Min	Max	Description
unsigned int	value	20	4000	The value to which OnScreenSize will be set.

GetBoneReductionTargetOnScreenSize return value

Type: unsigned int

Default: 300

Syntax

// Setter
void SetBoneReductionTargetOnScreenSize(uint value);

// Getter
uint GetBoneReductionTargetOnScreenSize();

SetBoneReductionTargetOnScreenSize parameters

Type	Name	Min	Max	Description
uint	value	20	4000	The value to which OnScreenSize will be set.

GetBoneReductionTargetOnScreenSize return value

Type: uint

Default: 300

Syntax

# Setter
None SetBoneReductionTargetOnScreenSize(value: int)

# Getter
int GetBoneReductionTargetOnScreenSize()

SetBoneReductionTargetOnScreenSize parameters

Name	Type	Min	Max	Description
value	int	20	4000	The value to which OnScreenSize will be set.

GetBoneReductionTargetOnScreenSize return value

Type: int

Default: 300

BoneReductionTargetOnScreenSizeEnabled

Enable on screen size as a reduction target. The reducer will stop when the set on screen size has been reached.

Syntax

// Setter
void SetBoneReductionTargetOnScreenSizeEnabled( bool value );

// Getter
bool GetBoneReductionTargetOnScreenSizeEnabled();

SetBoneReductionTargetOnScreenSizeEnabled parameters

Type	Name	Min	Max	Description
bool	value			Value to set if on screen size should be used in the reduction.

GetBoneReductionTargetOnScreenSizeEnabled return value

Type: bool

Default: false

Syntax

// Setter
void SetBoneReductionTargetOnScreenSizeEnabled(bool value);

// Getter
bool GetBoneReductionTargetOnScreenSizeEnabled();

SetBoneReductionTargetOnScreenSizeEnabled parameters

Type	Name	Min	Max	Description
bool	value			Value to set if on screen size should be used in the reduction.

GetBoneReductionTargetOnScreenSizeEnabled return value

Type: bool

Default: false

Syntax

# Setter
None SetBoneReductionTargetOnScreenSizeEnabled(value: bool)

# Getter
bool GetBoneReductionTargetOnScreenSizeEnabled()

SetBoneReductionTargetOnScreenSizeEnabled parameters

Name	Type	Min	Max	Description
value	bool			Value to set if on screen size should be used in the reduction.

GetBoneReductionTargetOnScreenSizeEnabled return value

Type: bool

Default: false

BoneReductionTargetStopCondition

The stop condition for the bone reducer. Any: the reducer will stop when any single one of the set reduction targets have been reached. All: the reducer will stop when all enabled reduction targets have been set.

Syntax

// Setter
void SetBoneReductionTargetStopCondition( Simplygon::EStopCondition value );

// Getter
Simplygon::EStopCondition GetBoneReductionTargetStopCondition();

SetBoneReductionTargetStopCondition parameters

Type	Name	Min	Max	Description
EStopCondition	value			The flag to which StopCondition will be set.

GetBoneReductionTargetStopCondition return value

Type: EStopCondition

Default: All

Key	Value	Comment
Any	0	Simplygon will stop as soon as one of the reduction targets has been fulfilled.
All	1	Simplygon will continue processing until all of the reduction targets have been fulfilled.

Syntax

// Setter
void SetBoneReductionTargetStopCondition(enum(EStopCondition) value);

// Getter
 GetBoneReductionTargetStopCondition();

SetBoneReductionTargetStopCondition parameters

Type	Name	Min	Max	Description
EStopCondition	value			The flag to which StopCondition will be set.

GetBoneReductionTargetStopCondition return value

Type: ``````

Default: All

Key	Value	Comment
Any	0	Simplygon will stop as soon as one of the reduction targets has been fulfilled.
All	1	Simplygon will continue processing until all of the reduction targets have been fulfilled.

Syntax

# Setter
None SetBoneReductionTargetStopCondition(value: EStopCondition_*)

# Getter
EStopCondition_* GetBoneReductionTargetStopCondition()

SetBoneReductionTargetStopCondition parameters

Name	Type	Min	Max	Description
value	EStopCondition			The flag to which StopCondition will be set.

GetBoneReductionTargetStopCondition return value

Type: EStopCondition

Default: All

Key	Value	Comment
EStopCondition_Any	0	Simplygon will stop as soon as one of the reduction targets has been fulfilled.
EStopCondition_All	1	Simplygon will continue processing until all of the reduction targets have been fulfilled.

LimitBonesPerVertex

Decides whether unused bones should be removed.

Syntax

// Setter
void SetLimitBonesPerVertex( bool value );

// Getter
bool GetLimitBonesPerVertex();

SetLimitBonesPerVertex parameters

Type	Name	Min	Max	Description
bool	value			The desired flag value.

GetLimitBonesPerVertex return value

Type: bool

Default: false

Syntax

// Setter
void SetLimitBonesPerVertex(bool value);

// Getter
bool GetLimitBonesPerVertex();

SetLimitBonesPerVertex parameters

Type	Name	Min	Max	Description
bool	value			The desired flag value.

GetLimitBonesPerVertex return value

Type: bool

Default: false

Syntax

# Setter
None SetLimitBonesPerVertex(value: bool)

# Getter
bool GetLimitBonesPerVertex()

SetLimitBonesPerVertex parameters

Name	Type	Min	Max	Description
value	bool			The desired flag value.

GetLimitBonesPerVertex return value

Type: bool

Default: false

LockBoneSelectionSetID

The ID of the selection set that contains all of the bones that will be locked, and cannot be removed in the BoneLOD process. If a bone is locked, all its ancestors will be locked also. If the ID is -1, then no bones are selected.

Syntax

// Setter
void SetLockBoneSelectionSetID( rid value );

// Getter
rid GetLockBoneSelectionSetID();

SetLockBoneSelectionSetID parameters

Type	Name	Min	Max	Description
rid	value	-1		The ID of the selection set.

GetLockBoneSelectionSetID return value

Type: rid

Default: -1

Syntax

// Setter
void SetLockBoneSelectionSetID(rid value);

// Getter
rid GetLockBoneSelectionSetID();

SetLockBoneSelectionSetID parameters

Type	Name	Min	Max	Description
rid	value	-1		The ID of the selection set.

GetLockBoneSelectionSetID return value

Type: rid

Default: -1

Syntax

# Setter
None SetLockBoneSelectionSetID(value: int)

# Getter
int GetLockBoneSelectionSetID()

SetLockBoneSelectionSetID parameters

Name	Type	Min	Max	Description
value	int	-1		The ID of the selection set.

GetLockBoneSelectionSetID return value

Type: int

Default: -1

LockBoneSelectionSetName

The name of the selection set that contains all of the bones that will be locked, and cannot be removed in the BoneLOD process. If a bone is locked, all its ancestors will be locked also. If both name and id are set for the locked selection set, the name will be used.

Syntax

// Setter
void SetLockBoneSelectionSetName( const char * value );

// Getter
spString GetLockBoneSelectionSetName();

SetLockBoneSelectionSetName parameters

Type	Name	Min	Max	Description
const char *	value			The name of the selection set.

GetLockBoneSelectionSetName return value

Type: spString

Default: nullptr

Syntax

// Setter
void SetLockBoneSelectionSetName(string value);

// Getter
string GetLockBoneSelectionSetName();

SetLockBoneSelectionSetName parameters

Type	Name	Min	Max	Description
string	value			The name of the selection set.

GetLockBoneSelectionSetName return value

Type: string

Default: null

Syntax

# Setter
None SetLockBoneSelectionSetName(value: str)

# Getter
str GetLockBoneSelectionSetName()

SetLockBoneSelectionSetName parameters

Name	Type	Min	Max	Description
value	str			The name of the selection set.

GetLockBoneSelectionSetName return value

Type: str

Default: None

MaxBonePerVertex

Decides the maximum limit of how many bones can be connected to each vertex. If for example set to 1, then each vertex will only be linked to 1 bone.

Syntax

// Setter
void SetMaxBonePerVertex( unsigned int value );

// Getter
unsigned int GetMaxBonePerVertex();

SetMaxBonePerVertex parameters

Type	Name	Min	Max	Description
unsigned int	value	0	UINT_MAX	The desired maximum bones per vertex.

GetMaxBonePerVertex return value

Type: unsigned int

Default: 64

Syntax

// Setter
void SetMaxBonePerVertex(uint value);

// Getter
uint GetMaxBonePerVertex();

SetMaxBonePerVertex parameters

Type	Name	Min	Max	Description
uint	value	0	UINT_MAX	The desired maximum bones per vertex.

GetMaxBonePerVertex return value

Type: uint

Default: 64

Syntax

# Setter
None SetMaxBonePerVertex(value: int)

# Getter
int GetMaxBonePerVertex()

SetMaxBonePerVertex parameters

Name	Type	Min	Max	Description
value	int	0	UINT_MAX	The desired maximum bones per vertex.

GetMaxBonePerVertex return value

Type: int

Default: 64

RemoveBoneSelectionSetID

The ID of the selection set that contains all of the bones that will be forced to be removed in the BoneLOD process, UNLESS they are locked. If a bone is set to be removed, all its descendants will be removed also. If both name and id are set for the remove selection set, the name will be used.

Syntax

// Setter
void SetRemoveBoneSelectionSetID( rid value );

// Getter
rid GetRemoveBoneSelectionSetID();

SetRemoveBoneSelectionSetID parameters

Type	Name	Min	Max	Description
rid	value	-1		The ID of the selection set.

GetRemoveBoneSelectionSetID return value

Type: rid

Default: -1

Syntax

// Setter
void SetRemoveBoneSelectionSetID(rid value);

// Getter
rid GetRemoveBoneSelectionSetID();

SetRemoveBoneSelectionSetID parameters

Type	Name	Min	Max	Description
rid	value	-1		The ID of the selection set.

GetRemoveBoneSelectionSetID return value

Type: rid

Default: -1

Syntax

# Setter
None SetRemoveBoneSelectionSetID(value: int)

# Getter
int GetRemoveBoneSelectionSetID()

SetRemoveBoneSelectionSetID parameters

Name	Type	Min	Max	Description
value	int	-1		The ID of the selection set.

GetRemoveBoneSelectionSetID return value

Type: int

Default: -1

RemoveBoneSelectionSetName

The name of the selection set that contains all of the bones that will be forced to be removed in the BoneLOD process, UNLESS they are locked. If a bone is set to be removed, all its descendants will be removed also. If both name and id are set for the remove selection set, the name will be used.

Syntax

// Setter
void SetRemoveBoneSelectionSetName( const char * value );

// Getter
spString GetRemoveBoneSelectionSetName();

SetRemoveBoneSelectionSetName parameters

Type	Name	Min	Max	Description
const char *	value			The name of the selection set.

GetRemoveBoneSelectionSetName return value

Type: spString

Default: nullptr

Syntax

// Setter
void SetRemoveBoneSelectionSetName(string value);

// Getter
string GetRemoveBoneSelectionSetName();

SetRemoveBoneSelectionSetName parameters

Type	Name	Min	Max	Description
string	value			The name of the selection set.

GetRemoveBoneSelectionSetName return value

Type: string

Default: null

Syntax

# Setter
None SetRemoveBoneSelectionSetName(value: str)

# Getter
str GetRemoveBoneSelectionSetName()

SetRemoveBoneSelectionSetName parameters

Name	Type	Min	Max	Description
value	str			The name of the selection set.

GetRemoveBoneSelectionSetName return value

Type: str

Default: None

RemoveUnusedBones

Decides whether unused bones should be removed.

Syntax

// Setter
void SetRemoveUnusedBones( bool value );

// Getter
bool GetRemoveUnusedBones();

SetRemoveUnusedBones parameters

Type	Name	Min	Max	Description
bool	value			The desired flag value.

GetRemoveUnusedBones return value

Type: bool

Default: false

Syntax

// Setter
void SetRemoveUnusedBones(bool value);

// Getter
bool GetRemoveUnusedBones();

SetRemoveUnusedBones parameters

Type	Name	Min	Max	Description
bool	value			The desired flag value.

GetRemoveUnusedBones return value

Type: bool

Default: false

Syntax

# Setter
None SetRemoveUnusedBones(value: bool)

# Getter
bool GetRemoveUnusedBones()

SetRemoveUnusedBones parameters

Name	Type	Min	Max	Description
value	bool			The desired flag value.

GetRemoveUnusedBones return value

Type: bool

Default: false

UseBoneReducer

Enables or disables the bone reduction processing that actually removes bones. Even with this flag off, the bones per vertex can still be limited.

Syntax

// Setter
void SetUseBoneReducer( bool value );

// Getter
bool GetUseBoneReducer();

SetUseBoneReducer parameters

Type	Name	Min	Max	Description
bool	value			The desired flag value.

GetUseBoneReducer return value

Type: bool

Default: false

Syntax

// Setter
void SetUseBoneReducer(bool value);

// Getter
bool GetUseBoneReducer();

SetUseBoneReducer parameters

Type	Name	Min	Max	Description
bool	value			The desired flag value.

GetUseBoneReducer return value

Type: bool

Default: false

Syntax

# Setter
None SetUseBoneReducer(value: bool)

# Getter
bool GetUseBoneReducer()

SetUseBoneReducer parameters

Name	Type	Min	Max	Description
value	bool			The desired flag value.

GetUseBoneReducer return value

Type: bool

Default: false

Methods details

GetBoolParameter

Get a named parameter boolean value.

Syntax

bool GetBoolParameter( const char * name );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.

Return value

Type: bool

Syntax

bool GetBoolParameter(string name);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.

Return value

Type: bool

Syntax

bool GetBoolParameter(name: str)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.

Return value

Type: bool

GetClass

Get the name of the BoneSettings class.

Syntax

spString GetClass();

Parameters

GetClass takes no parameters.

Return value

Type: spString

Syntax

string GetClass();

Parameters

GetClass takes no parameters.

Return value

Type: string

Syntax

str GetClass()

Parameters

GetClass takes no parameters.

Return value

Type: str

GetDoubleParameter

Get a named parameter floating point value.

Syntax

double GetDoubleParameter( const char * name );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.

Return value

Type: double

Syntax

double GetDoubleParameter(string name);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.

Return value

Type: double

Syntax

float GetDoubleParameter(name: str)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.

Return value

Type: float

GetErrorString

Returns a string describing the error that was found the last time ValidateSettings was performed.

Syntax

spString GetErrorString();

Parameters

GetErrorString takes no parameters.

Return value

Type: spString

Syntax

string GetErrorString();

Parameters

GetErrorString takes no parameters.

Return value

Type: string

Syntax

str GetErrorString()

Parameters

GetErrorString takes no parameters.

Return value

Type: str

GetIntParameter

Get a named parameter integer value.

Syntax

int GetIntParameter( const char * name );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.

Return value

Type: int

Syntax

int GetIntParameter(string name);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.

Return value

Type: int

Syntax

int GetIntParameter(name: str)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.

Return value

Type: int

GetStringParameter

Get a named parameter string value.

Syntax

spString GetStringParameter( const char * name );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.

Return value

Type: spString

Syntax

string GetStringParameter(string name);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.

Return value

Type: string

Syntax

str GetStringParameter(name: str)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.

Return value

Type: str

GetUIntParameter

Get a named parameter unsigned integer value.

Syntax

unsigned int GetUIntParameter( const char * name );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.

Return value

Type: unsigned int

Syntax

uint GetUIntParameter(string name);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.

Return value

Type: uint

Syntax

int GetUIntParameter(name: str)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.

Return value

Type: int

IsA

Returns true if BoneSettings is a or is a descendant of the class named as the type parameter.

Syntax

bool IsA( const char * type );

Parameters

Type	Name	Min	Max	Description
const char *	type			Name of the class to check if BoneSettings is, or is a descendant of.

Return value

Type: bool

Syntax

bool IsA(string type);

Parameters

Type	Name	Min	Max	Description
string	type			Name of the class to check if BoneSettings is, or is a descendant of.

Return value

Type: bool

Syntax

bool IsA(type: str)

Parameters

Name	Type	Min	Max	Description
type	str			Name of the class to check if BoneSettings is, or is a descendant of.

Return value

Type: bool

IsNull

Returns true if the BoneSettings object is invalid.

Syntax

bool IsNull();

Parameters

IsNull takes no parameters.

Return value

Type: bool

Syntax

bool IsNull();

Parameters

IsNull takes no parameters.

Return value

Type: bool

Syntax

bool IsNull()

Parameters

IsNull takes no parameters.

Return value

Type: bool

SetBoneReductionTargets

Set bone reduction targets and stop condition used in the bone reduction.

Syntax

void SetBoneReductionTargets( Simplygon::EStopCondition stopCondition , bool useBoneRatio , bool useBoneCount , bool useMaxDeviation , bool useOnScreenSize );

Parameters

Type	Name	Min	Max	Description
EStopCondition	stopCondition			The value to which BoneReductionTargetStopCondition will be set.
bool	useBoneRatio			The value to which BoneReductionTargetBoneRatioEnabled will be set.
bool	useBoneCount			The value to which BoneReductionTargetBoneCountEnabled will be set.
bool	useMaxDeviation			The value to which BoneReductionTargetMaxDeviationEnabled will be set.
bool	useOnScreenSize			The value to which BoneReductionTargetOnScreenSizeEnabled will be set.

Syntax

void SetBoneReductionTargets(enum(EStopCondition) stopCondition, bool useBoneRatio, bool useBoneCount, bool useMaxDeviation, bool useOnScreenSize);

Parameters

Type	Name	Min	Max	Description
EStopCondition	stopCondition			The value to which BoneReductionTargetStopCondition will be set.
bool	useBoneRatio			The value to which BoneReductionTargetBoneRatioEnabled will be set.
bool	useBoneCount			The value to which BoneReductionTargetBoneCountEnabled will be set.
bool	useMaxDeviation			The value to which BoneReductionTargetMaxDeviationEnabled will be set.
bool	useOnScreenSize			The value to which BoneReductionTargetOnScreenSizeEnabled will be set.

Syntax

None SetBoneReductionTargets(stopCondition: EStopCondition_*, useBoneRatio: bool, useBoneCount: bool, useMaxDeviation: bool, useOnScreenSize: bool)

Parameters

Name	Type	Min	Max	Description
stopCondition	EStopCondition			The value to which BoneReductionTargetStopCondition will be set.
useBoneRatio	bool			The value to which BoneReductionTargetBoneRatioEnabled will be set.
useBoneCount	bool			The value to which BoneReductionTargetBoneCountEnabled will be set.
useMaxDeviation	bool			The value to which BoneReductionTargetMaxDeviationEnabled will be set.
useOnScreenSize	bool			The value to which BoneReductionTargetOnScreenSizeEnabled will be set.

SetBoolParameter

Set a named parameter boolean value.

Syntax

bool SetBoolParameter( const char * name , bool value );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.
bool	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetBoolParameter(string name, bool value);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.
bool	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetBoolParameter(name: str, value: bool)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.
value	bool			New value for parameter.

Return value

Type: bool

SetDoubleParameter

Set a named parameter floating point value.

Syntax

bool SetDoubleParameter( const char * name , double value );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.
double	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetDoubleParameter(string name, double value);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.
double	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetDoubleParameter(name: str, value: float)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.
value	float			New value for parameter.

Return value

Type: bool

SetIntParameter

Set a named parameter integer value.

Syntax

bool SetIntParameter( const char * name , int value );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.
int	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetIntParameter(string name, int value);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.
int	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetIntParameter(name: str, value: int)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.
value	int			New value for parameter.

Return value

Type: bool

SetStringParameter

Set a named parameter string value.

Syntax

bool SetStringParameter( const char * name , const char * value );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.
const char *	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetStringParameter(string name, string value);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.
string	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetStringParameter(name: str, value: str)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.
value	str			New value for parameter.

Return value

Type: bool

SetUIntParameter

Set a named parameter unsigned integer value.

Syntax

bool SetUIntParameter( const char * name , unsigned int value );

Parameters

Type	Name	Min	Max	Description
const char *	name			Parameter name.
unsigned int	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetUIntParameter(string name, uint value);

Parameters

Type	Name	Min	Max	Description
string	name			Parameter name.
uint	value			New value for parameter.

Return value

Type: bool

Syntax

bool SetUIntParameter(name: str, value: int)

Parameters

Name	Type	Min	Max	Description
name	str			Parameter name.
value	int			New value for parameter.

Return value

Type: bool

ToJSON

Get settings as JSON for debugging purposes.

Syntax

spString ToJSON();

Parameters

ToJSON takes no parameters.

Return value

Type: spString

Syntax

string ToJSON();

Parameters

ToJSON takes no parameters.

Return value

Type: string

Syntax

str ToJSON()

Parameters

ToJSON takes no parameters.

Return value

Type: str

ValidateSettings

Validates the current settings values.

Syntax

bool ValidateSettings();

Parameters

ValidateSettings takes no parameters.

Return value

Type: bool

Syntax

bool ValidateSettings();

Parameters

ValidateSettings takes no parameters.

Return value

Type: bool

Syntax

bool ValidateSettings()

Parameters

ValidateSettings takes no parameters.

Return value

Type: bool

Static methods details

IsClassA

Returns true if the class is a or is a descendant of the class named as the type parameter.

Syntax

static bool IsClassA( const char * type );

Parameters

Type	Name	Min	Max	Description
const char *	type			Name of the class to check if the class is, or is a descendant of.

Return value

Type: bool

Syntax

static bool IsClassA(string type);

Parameters

Type	Name	Min	Max	Description
string	type			Name of the class to check if the class is, or is a descendant of.

Return value

Type: bool

Syntax

@staticmethod
bool IsClassA(type: str)

Parameters

Name	Type	Min	Max	Description
type	str			Name of the class to check if the class is, or is a descendant of.

Return value

Type: bool

SafeCast

SafeCast makes sure the input object is of a class that can be cast into spBoneSettings, and if this is the case, returns the object cast into spBoneSettings.

Syntax

static spBoneSettings SafeCast( spObject object );

Parameters

Type	Name	Min	Max	Description
Object	object			Object to cast.

Return value

Type: BoneSettings

Syntax

static spBoneSettings SafeCast(spObject object);

Parameters

Type	Name	Min	Max	Description
Object	object			Object to cast.

Return value

Type: BoneSettings

Syntax

@staticmethod
spBoneSettings SafeCast(object: spObject)

Parameters

Name	Type	Min	Max	Description
object	Object			Object to cast.

Return value

Type: BoneSettings