Bone reduction settings

Simplygon is able to reduce the number of bones used in animation by re-linking vertices to different bones. The user can both select a maximum number of bones allowed per vertex and limit the total number of bones used in the scene. Simplygon can either automatically detect which bones are best suited to be removed, or the user can manually select which bones to keep or removed using selection sets.

Supported processors

• Reduction processor
• Remeshing processor

Example

This example shows how to use the Reduction processor with bone settings.

// Copyright (c) Microsoft Corporation. 
// Licensed under the MIT license. 

#include <string>
#include <stdlib.h>
#include <filesystem>
#include <future>
#include "SimplygonLoader.h"


void RunReduction(Simplygon::ISimplygon* sg)
{
	Simplygon::spSceneImporter sgSceneImporter = sg->CreateSceneImporter();
	sgSceneImporter->SetImportFilePath( "../Assets/RiggedSimplygonMan/RiggedSimplygonMan.fbx" );
	if(!sgSceneImporter->RunImport())
		throw std::exception("Failed to load RiggedSimplygonMan/RiggedSimplygonMan.fbx.");
	Simplygon::spScene sgScene = sgSceneImporter->GetScene();

	// Create the reduction processor. 
	Simplygon::spReductionProcessor sgReductionProcessor = sg->CreateReductionProcessor();

	sgReductionProcessor->SetScene( sgScene );

	Simplygon::spReductionSettings sgReductionSettings = sgReductionProcessor->GetReductionSettings();
	Simplygon::spBoneSettings sgBoneSettings = sgReductionProcessor->GetBoneSettings();

	// Set reduction target to triangle ratio with a ratio of 50%. 
	sgReductionSettings->SetReductionTargets( Simplygon::EStopCondition::All, true, false, false, false );
	sgReductionSettings->SetReductionTargetTriangleRatio( 0.5f );

	// Enable bone reducer. 
	sgBoneSettings->SetUseBoneReducer( true );

	// Set bone reduction target to bone ratio with a ratio of 50%. 
	sgBoneSettings->SetBoneReductionTargets( Simplygon::EStopCondition::All, true, false, false, false );
	sgBoneSettings->SetBoneReductionTargetBoneRatio( 0.5f );

	// Set bones per vertex limitations. 
	sgBoneSettings->SetLimitBonesPerVertex( true );
	sgBoneSettings->SetMaxBonePerVertex( 64 );

	// Remove unused bones. 
	sgBoneSettings->SetRemoveUnusedBones( true );

	// Start the reduction process. 
	sgReductionProcessor->RunProcessing();

	Simplygon::spSceneExporter  sgSceneExporter = sg->CreateSceneExporter();
	sgSceneExporter->SetScene(sgScene);
	sgSceneExporter->SetExportFilePath( "ReductionOutput.fbx" );
	if(!sgSceneExporter->RunExport())
		throw std::exception("Failed to save ReductionOutput.fbx.");

}

void main()
{
	Simplygon::ISimplygon* sg = NULL;
	Simplygon::EErrorCodes initval = Simplygon::Initialize( &sg );
	if( initval != Simplygon::EErrorCodes::NoError )
	{
		return;
	}

	RunReduction(sg);

	Simplygon::Deinitialize(sg);
}

// Copyright (c) Microsoft Corporation. 
// Licensed under the MIT license. 

using System;
using System.IO;
using System.Threading.Tasks;

public class Program
{
    static void RunReduction(Simplygon.ISimplygon sg)
    {
        using (Simplygon.spSceneImporter sgSceneImporter = sg.CreateSceneImporter())
        {
            sgSceneImporter.SetImportFilePath( "../Assets/RiggedSimplygonMan/RiggedSimplygonMan.fbx" );
            if(!sgSceneImporter.RunImport())
                throw new System.Exception("Failed to load RiggedSimplygonMan/RiggedSimplygonMan.fbx.");
            Simplygon.spScene sgScene = sgSceneImporter.GetScene();

            // Create the reduction processor. 
            using (Simplygon.spReductionProcessor sgReductionProcessor = sg.CreateReductionProcessor())
            {
                sgReductionProcessor.SetScene( sgScene );

                using (Simplygon.spReductionSettings sgReductionSettings = sgReductionProcessor.GetReductionSettings())
                using (Simplygon.spBoneSettings sgBoneSettings = sgReductionProcessor.GetBoneSettings())
                {
                    // Set reduction target to triangle ratio with a ratio of 50%. 
                    sgReductionSettings.SetReductionTargets( Simplygon.EStopCondition.All, true, false, false, false );
                    sgReductionSettings.SetReductionTargetTriangleRatio( 0.5f );

                    // Enable bone reducer. 
                    sgBoneSettings.SetUseBoneReducer( true );

                    // Set bone reduction target to bone ratio with a ratio of 50%. 
                    sgBoneSettings.SetBoneReductionTargets( Simplygon.EStopCondition.All, true, false, false, false );
                    sgBoneSettings.SetBoneReductionTargetBoneRatio( 0.5f );

                    // Set bones per vertex limitations. 
                    sgBoneSettings.SetLimitBonesPerVertex( true );
                    sgBoneSettings.SetMaxBonePerVertex( 64 );

                    // Remove unused bones. 
                    sgBoneSettings.SetRemoveUnusedBones( true );

                }
                // Start the reduction process. 
                sgReductionProcessor.RunProcessing();

            }
            using (Simplygon.spSceneExporter sgSceneExporter = sg.CreateSceneExporter())
            {
                sgSceneExporter.SetScene(sgScene);
                sgSceneExporter.SetExportFilePath( "ReductionOutput.fbx" );
                if(!sgSceneExporter.RunExport())
                    throw new System.Exception("Failed to save ReductionOutput.fbx.");

            }
        }
    }
    static void Main(string[] args)
    {
        using (var sg = Simplygon.Loader.InitSimplygon(out var errorCode, out var errorMessage))
        {
            if (errorCode != Simplygon.EErrorCodes.NoError)
                return;
            RunReduction(sg);
        }
    }
}

# Copyright (c) Microsoft Corporation. 
# Licensed under the MIT license. 

import math
import os
import sys
import glob
import gc
import threading

from pathlib import Path
from simplygon import simplygon_loader
from simplygon import Simplygon


def RunReduction(sg: Simplygon.ISimplygon):
    sgSceneImporter = sg.CreateSceneImporter()
    sgSceneImporter.SetImportFilePath( '../Assets/RiggedSimplygonMan/RiggedSimplygonMan.fbx' )
    if not sgSceneImporter.RunImport():
        raise Exception('Failed to load RiggedSimplygonMan/RiggedSimplygonMan.fbx.')
    sgScene = sgSceneImporter.GetScene()

    # Create the reduction processor. 
    sgReductionProcessor = sg.CreateReductionProcessor()

    sgReductionProcessor.SetScene( sgScene )

    sgReductionSettings = sgReductionProcessor.GetReductionSettings()
    sgBoneSettings = sgReductionProcessor.GetBoneSettings()

    # Set reduction target to triangle ratio with a ratio of 50%. 
    sgReductionSettings.SetReductionTargets( Simplygon.EStopCondition_All, True, False, False, False )
    sgReductionSettings.SetReductionTargetTriangleRatio( 0.5 )

    # Enable bone reducer. 
    sgBoneSettings.SetUseBoneReducer( True )

    # Set bone reduction target to bone ratio with a ratio of 50%. 
    sgBoneSettings.SetBoneReductionTargets( Simplygon.EStopCondition_All, True, False, False, False )
    sgBoneSettings.SetBoneReductionTargetBoneRatio( 0.5 )

    # Set bones per vertex limitations. 
    sgBoneSettings.SetLimitBonesPerVertex( True )
    sgBoneSettings.SetMaxBonePerVertex( 64 )

    # Remove unused bones. 
    sgBoneSettings.SetRemoveUnusedBones( True )

    # Start the reduction process. 
    sgReductionProcessor.RunProcessing()

    sgSceneExporter = sg.CreateSceneExporter()
    sgSceneExporter.SetScene(sgScene)
    sgSceneExporter.SetExportFilePath( 'ReductionOutput.fbx' )
    if not sgSceneExporter.RunExport():
        raise Exception('Failed to save ReductionOutput.fbx.')


if __name__ == '__main__':
    sg = simplygon_loader.init_simplygon()
    if sg is not None:

        RunReduction(sg)

    sg = None
    gc.collect()