Enums

EBoneReductionTargetStopCondition

The stop condition for the bone reducer. Any: the reducer will stop when any single one of the set reduction targets have been reached. All: the reducer will stop when all enabled reduction targets have been set.

Key	Value	Comment
Any	0x00000000	Simplygon will stop as soon as one of the reduction targets has been fulfilled.
All	0x00000001	Simplygon will continue processing until all of the reduction targets have been fulfilled.

EChartAggregatorMode

Determines which method to use when aggregating the UVs. TextureSizeProportions - Aggregated UV charts will be scaled to keep their relative pixel density relative to all other UV charts. The user can still set the size of the output texture maps. SurfaceArea - Aggregated UV charts will have their size set based on its actual geometrical size. OriginalPixelDensity - The combined atlas will be resized to fit each chart so that all charts retain the same amount of pixels as they originally had. This will override any manually set texture size. UVSizeProportions - Aggregated UV charts will have their size set based on its original UV size, disregarding the size of the texture they are used in.

Key	Value	Comment
TextureSizeProportions	0x00000000	Aggregated UV charts will be scaled to keep their relative pixel density relative to all other UV charts. The user can still set the size of the output texture maps.
SurfaceArea	0x00000001	Aggregated UV charts will have their size set based on its actual geometrical size.
OriginalPixelDensity	0x00000002	The combined atlas will be resized to fit each chart so that all charts retain the same amount of pixels as they originally had. This will override any manually set texture size.
UVSizeProportions	0x00000003	Aggregated UV charts will have their size set based on its original UV size, disregarding the size of the texture they are used in.

EComputeVisibilityMode

Specifies the renderer type when computing visibility.

Key	Value	Comment
DirectX	0x00000000	Use DirectX when computing visibility.
Software	0x00000001	Use a software renderer when computing visibility.

EDataCreationPreferences

The flag that specifies how big 'freedom' Simplygon has when it comes to altering vertex/triangle data. Allowing more altered data means it will be easier to create good looking LODs, but without altered data it will be easier to keep the memory-usage in the LOD-chain more optimized. Note: When using OnlyUseOriginalData, the geometry being reduced can not have a node transformation matrix other than the identity matrix.

Key	Value	Comment
OnlyUseOriginalData	0x00000000	Vertex and Corner data such as coordinates and normals will be completely re-used from the original Scene.
PreferOriginalData	0x00000001	Vertex coordinates will remaining as they were in the original Scene, but corner normals might be changed if Simplygon decided it will look better.
PreferOptimizedResult	0x00000002	Both vertex coordinates and corner normals will be altered to make the optimized Scene look as good as possible.

EDitherType

The type of dithering to use when creating the output object.

Key	Value	Comment
NoDither	0x00000000	Use no dithering
FloydSteinberg	0x00000001	Use Floys-Steinberg dithering
JarvisJudiceNinke	0x00000002	Use Jarvis, Judice, and Ninke dithering
Sierra	0x00000003	Use Sierra-3 (three row) dithering

EFillMode

The fill mode determines what to do with the pixels that remain unfilled after both the casting and dilation has been performed. Options are: None = Do not fill remaining pixels Interpolate = linearly interpolate the closest samples NearestNeighbor = use the closest available pixel value without interpolation.

Key	Value	Comment
Interpolate	0x00000000	linearly interpolate the closest samples
NearestNeighbor	0x00000001	use the closest available pixel value without interpolation
NoFill	0x00000002	Do not fill remaining pixels

EGeometryDataFieldType

The GeometryDataFieldType setting, which specifies what field type to cast in the GeometryDataCaster.

Key	Value	Comment
Coords	0x00000000	Per-vertex coordinate data, xyz values (3 items per tuple)
TexCoords	0x00000001	Per-corner texture coords data, uv values (2 items per tuple)
Normals	0x00000002	Per-corner vertex normals data, xyz values (3 items per tuple)
Tangents	0x00000003	Per-corner vertex tangent data, xyz values (3 items per tuple)
Bitangents	0x00000004	Per-corner vertex bitangent data, xyz values (3 items per tuple)
Colors	0x00000005	Per-corner vertex color data, rgba values (4 items per tuple)
TriangleIds	0x00000006	Per-triangle triangle ids, id values, not interpolated. (1 item per tuple)
MaterialIds	0x00000007	Per-triangle material ids, id values, not interpolated. (1 item per tuple)

EHoleFilling

HoleFillling defines how aggresively the remesher will fill holes and cavities. What this does is to measure the volume and hole opening sizes of concavities in the input geometry and fill them in in the remeshing if the concavity is large enough with a small enough opening. This removes a lot of unnessecary geometry and is recommended to be kept at it's default rather than turning it off, it will in the vast majority of cases have a positive effect on the result.

Key	Value	Comment
Disabled	0x00000000	No hole filling.
Low	0x00000001	Minor hole filling.
Medium	0x00000002	Moderate ammounts of hole filling.
High	0x00000003	Aggresive hole filling.

EOpacityChannelComponent

The component in the opacity channel to use as opacity value.

Key	Value	Comment
Red	0x00000000	Red color component
Green	0x00000001	Green color component
Blue	0x00000002	Blue color component
Alpha	0x00000003	Alpha color component

EOutputDDSCompressionType

DDS compression if output format is DDS.

Key	Value	Comment
NoCompression	0xFFFFFFFFFFFFFFFF
BC1	0x00000000
BC2	0x00000001
BC3	0x00000002
BC4	0x00000003
BC5	0x00000004

EOutputImageFileFormat

File format for output texture.

Key	Value	Comment
BMP	0x00000000
DDS	0x00000001
JPEG	0x00000002
PNG	0x00000003
TGA	0x00000004
TIFF	0x00000005

EOutputOpacityType

The opacity type determines how the opacity channel of this material should be saved. To make (0.0->1.0) map to (transparent-opaque), use 'Opacity'. To make (0.0->1.0) map to (opaque-transparent), use 'Transparency'

Key	Value	Comment
Opacity	0x00000000	The level of transparency is defined from 0.0->1.0, where 0.0 is fully transparent and 1.0 is fully opaque.
Transparency	0x00000001	The level of transparency is defined from 1.0->0.0, where 1.0 is fully transparent and 0.0 is fully opaque.

EOutputPixelFormat

The output pixel format

Key	Value	Comment
R8G8B8A8	0x00000000	RGBA color channels with 8 bit depth per color channel
R8G8B8	0x00000001	RGB color channels with 8 bit depth per color channel
R8	0x00000002	R color channel with 8 bit depth per color channel
R16G16B16A16	0x00000003	RGBA color channels with 16 bit depth per color channel
R16G16B16	0x00000004	RGB color channels with 16 bit depth per color channel
R16	0x00000005	R color channel with 16 bit depth per color channel

EReductionHeuristics

The flag that decides how precise the reducer will be during the mesh reduction. Fast -> Reducer will be faster, but onscreensize and trianglecount will not match perfectly. Consistent -> Reducer will be slower, but onscreensize and trianglecount will consistently give matching results.

Key	Value	Comment
Fast	0x00000000	Faster but with less precise calculations.
Consistent	0x00000001	Slower but more accurate.

EReductionTargetStopCondition

The stop condition for the reducer. Any -> the reducer will stop when any single one of the set reduction targets have been reached. All -> the reducer will stop when all enabled reduction targets have been set.

Key	Value	Comment
Any	0x00000000	Simplygon will stop as soon as one of the reduction targets has been fulfilled.
All	0x00000001	Simplygon will continue processing until all of the reduction targets have been fulfilled.

ERemeshingMode

The remeshing mode, options are Outside, Inside and Manual. RemeshingMode defines if the remeshing processor remeshes the outside or the inside of the input geometry. Manual needs the user to define a position in space that will be considered as outside for the purposes of the remeshing. Position is set with RemeshingModeManualPosition. Hole filling only works with the mode Outside.

Key	Value	Comment
Outside	0x00000000	Automatically remeshes the outside of the geometry.
Inside	0x00000001	Automatically remeshes the largest inside space of the geometry
Manual	0x00000002	User defines a position in space that will be considered as outside for the purposes of the remeshing. Position is set with RemeshingModeManualPosition

ESurfaceAreaScale

If multiple UV charts overlap and have the same material, SurfaceAreaScale specifies which of those instances determines the the output scale. It is only valid when the ChartAggregatorMode is SurfaceArea and SeparateOverlappingCharts is false.

Key	Value	Comment
LargestInstance	0x00000000	If multiple UV charts overlap and have the same material, the largest instance determines the output scale. It is only valid when the ChartAggregatorMode is SurfaceArea and SeparateOverlappingCharts is false.
SmallestInstance	0x00000001	If multiple UV charts overlap and have the same material, the smallest instance determines the output scale. It is only valid when the ChartAggregatorMode is SurfaceArea and SeparateOverlappingCharts is false.
Average	0x00000002	If multiple UV charts overlap and have the same material, the average of all the instances determine the output scale. It is only valid when the ChartAggregatorMode is SurfaceArea and SeparateOverlappingCharts is false.

ESurfaceTransferMode

The surface transfer mode.

Key	Value	Comment
Fast	0x00000000	Faster but with less precise calculations.
Accurate	0x00000001	Slower and more accurate.

ESymmetryAxis

Set what axis to be used for symmetry calculations.

Key	Value	Comment
X	0x00000000	X axis.
Y	0x00000001	Z axis.
Z	0x00000002	Z axis.

ETexCoordGeneratorType

Determines which method to use when generating the texture coordinates. Parameterizer generate from scratch based on the geometry. ChartAggregator generate based on the original texture coordinates.

Key	Value	Comment
Parameterizer	0x00000000	Texture coordinates are generated from scratch based on the geometry.
ChartAggregator	0x00000001	Texture coordinates are generated based on the original texture coordinates.

EWeightsFromColorComponent

If converting vertex colors to weights, this setting controls which color component is used to create the weights.

Key	Value	Comment
Red	0x00000000	Red color component
Green	0x00000001	Green color component
Blue	0x00000002	Blue color component
Alpha	0x00000003	Alpha color component

EWeightsFromColorMode

If converting vertex colors to weights, this setting along with WeightsFromColorMultiplier controls how to map the RGBA intensity between 0-1 to weights. Standard mode maps color intensity [0-1] to vertex weight [1/Multiplier - Multiplier]. High mode maps color intensity [0-1] to vertex weight [1 - Multiplier]. Low mode maps color intensity [0-1] to vertex weight [1/Multiplier - 1].

Key	Value	Comment
Standard	0x00000000	Maps color intensity [0-1] to vertex weight [1/Multiplier - Multiplier]
High	0x00000001	Maps color intensity [0-1] to vertex weight [1 - Multiplier]
Low	0x00000002	Maps color intensity [0-1] to vertex weight [1/Multiplier - 1]