This example shows how to use the Simplygon error handler.

// Copyright (c) Microsoft Corporation. 
// Licensed under the MIT License. 

#include <string>
#include <stdlib.h>
#include <filesystem>
#include <future>
#include "SimplygonLoader.h"

class CustomErrorHandler : public Simplygon::ErrorHandler
{
	public:
	void HandleError(Simplygon::spObject object, const char* interfaceName, const char* methodName, Simplygon::rid errorType , const char* errorText) override
	{
		printf("Error (%s:%s): %s\n", interfaceName, methodName, errorText);
	}
} customErrorHandler;


void CheckLog(Simplygon::ISimplygon* sg)
{
	// Check if any errors occurred. 
	bool hasErrors = sg->ErrorOccurred();
	if (hasErrors)
	{
		Simplygon::spStringArray errors = sg->CreateStringArray();
		sg->GetErrorMessages(errors);
		auto errorCount = errors->GetItemCount();
		if (errorCount > 0)
		{
			printf("%s\n", "Errors:");
			for (auto errorIndex = 0U; errorIndex < errorCount; ++errorIndex)
			{
				Simplygon::spString errorString = errors->GetItem((int)errorIndex);
				printf("%s\n", errorString.c_str());
			}
			sg->ClearErrorMessages();
		}
	}
	else
	{
		printf("%s\n", "No errors.");
	}
	
	// Check if any warnings occurred. 
	bool hasWarnings = sg->WarningOccurred();
	if (hasWarnings)
	{
		Simplygon::spStringArray warnings = sg->CreateStringArray();
		sg->GetWarningMessages(warnings);
		auto warningCount = warnings->GetItemCount();
		if (warningCount > 0)
		{
			printf("%s\n", "Warnings:");
			for (auto warningIndex = 0U; warningIndex < warningCount; ++warningIndex)
			{
				Simplygon::spString warningString = warnings->GetItem((int)warningIndex);
				printf("%s\n", warningString.c_str());
			}
			sg->ClearWarningMessages();
		}
	}
	else
	{
		printf("%s\n", "No warnings.");
	}
	
	// Error out if Simplygon has errors. 
	if (hasErrors)
	{
		throw std::exception("Processing failed with an error");
	}
}

void RunReduction(Simplygon::ISimplygon* sg)
{
	// Set the custom error handler to the Simplygon interface. 
	sg->SetErrorHandler(&customErrorHandler);

	
	// Create the reduction pipeline. 
	Simplygon::spReductionPipeline sgReductionPipeline = sg->CreateReductionPipeline();
	
	// To be able to use the T-Junction remover, the welder has to be enabled so this will trigger an 
	// error. 
	Simplygon::spRepairSettings sgRepairSettings = sgReductionPipeline->GetRepairSettings();
	sgRepairSettings->SetUseWelding( false );
	sgRepairSettings->SetUseTJunctionRemover( true );
	
	// Start the reduction pipeline and the faulty settings will cause an error. 	
	printf("%s\n", "Start the reduction pipeline and the faulty settings will cause an error.");
	sgReductionPipeline->RunSceneFromFile("../../../Assets/SimplygonMan/SimplygonMan.obj", "Output.fbx", Simplygon::EPipelineRunMode::RunInNewProcess);
	
	// Check log for any warnings or errors. 	
	printf("%s\n", "Check log for any warnings or errors.");
	CheckLog(sg);
}

int main()
{
	Simplygon::ISimplygon* sg = NULL;
	Simplygon::EErrorCodes initval = Simplygon::Initialize( &sg );
	if( initval != Simplygon::EErrorCodes::NoError )
	{
		printf( "Failed to initialize Simplygon: ErrorCode(%d)", (int)initval );
		return int(initval);
	}

	RunReduction(sg);

	Simplygon::Deinitialize(sg);

	return 0;
}

// Copyright (c) Microsoft Corporation. 
// Licensed under the MIT License. 

using System;
using System.IO;
using System.Threading.Tasks;

public class CustomErrorHandler : Simplygon.ErrorHandler
{
    public override void HandleError(Simplygon.spObject obj, string interfaceName, string methodName, int errorType , string errorText)
    {
        Console.WriteLine($"Error ({interfaceName}:{methodName}): {errorText}");
    }
}

public class Program
{
    static private CustomErrorHandler customErrorHandler;

    static void CheckLog(Simplygon.ISimplygon sg)
    {
        // Check if any errors occurred. 
        bool hasErrors = sg.ErrorOccurred();
        if (hasErrors)
        {
            Simplygon.spStringArray errors = sg.CreateStringArray();
            sg.GetErrorMessages(errors);
            var errorCount = errors.GetItemCount();
            if (errorCount > 0)
            {
                Console.WriteLine("Errors:");
                for (uint errorIndex = 0; errorIndex < errorCount; ++errorIndex)
                {
                    string errorString = errors.GetItem((int)errorIndex);
                    Console.WriteLine(errorString);
                }
                sg.ClearErrorMessages();
            }
        }
        else
        {
            Console.WriteLine("No errors.");
        }
        
        // Check if any warnings occurred. 
        bool hasWarnings = sg.WarningOccurred();
        if (hasWarnings)
        {
            Simplygon.spStringArray warnings = sg.CreateStringArray();
            sg.GetWarningMessages(warnings);
            var warningCount = warnings.GetItemCount();
            if (warningCount > 0)
            {
                Console.WriteLine("Warnings:");
                for (uint warningIndex = 0; warningIndex < warningCount; ++warningIndex)
                {
                    string warningString = warnings.GetItem((int)warningIndex);
                    Console.WriteLine(warningString);
                }
                sg.ClearWarningMessages();
            }
        }
        else
        {
            Console.WriteLine("No warnings.");
        }
        
        // Error out if Simplygon has errors. 
        if (hasErrors)
        {
            throw new System.Exception("Processing failed with an error");
        }
    }

    static void RunReduction(Simplygon.ISimplygon sg)
    {
        // Set the custom error handler to the Simplygon interface. 
        sg.SetErrorHandler(customErrorHandler);
        
        // Create the reduction pipeline. 
        using Simplygon.spReductionPipeline sgReductionPipeline = sg.CreateReductionPipeline();
        
        // To be able to use the T-Junction remover, the welder has to be enabled so this will trigger an 
        // error. 
        using Simplygon.spRepairSettings sgRepairSettings = sgReductionPipeline.GetRepairSettings();
        sgRepairSettings.SetUseWelding( false );
        sgRepairSettings.SetUseTJunctionRemover( true );
        
        // Start the reduction pipeline and the faulty settings will cause an error.         
        Console.WriteLine("Start the reduction pipeline and the faulty settings will cause an error.");
        sgReductionPipeline.RunSceneFromFile("../../../Assets/SimplygonMan/SimplygonMan.obj", "Output.fbx", Simplygon.EPipelineRunMode.RunInNewProcess);
        
        // Check log for any warnings or errors.         
        Console.WriteLine("Check log for any warnings or errors.");
        CheckLog(sg);
    }

    static int Main(string[] args)
    {
        using var sg = Simplygon.Loader.InitSimplygon(out var errorCode, out var errorMessage);
        if (errorCode != Simplygon.EErrorCodes.NoError)
        {
            Console.WriteLine( $"Failed to initialize Simplygon: ErrorCode({(int)errorCode}) {errorMessage}" );
            return (int)errorCode;
        }
        customErrorHandler = new CustomErrorHandler();
        RunReduction(sg);

        return 0;
    }

}

# Copyright (c) Microsoft Corporation. 
# Licensed under the MIT License. 

import math
import os
import sys
import glob
import gc
import threading

from pathlib import Path
from simplygon10 import simplygon_loader
from simplygon10 import Simplygon

class CustomErrorHandler(Simplygon.ErrorHandler):
    def HandleError(self, object: Simplygon.spObject, interfaceName: str, methodName: str, errorType: int, errorText: str):
        print('Error (%s:%s): %s' %(interfaceName, methodName, errorText))

customErrorHandler = CustomErrorHandler()

def CheckLog(sg: Simplygon.ISimplygon):
    # Check if any errors occurred. 
    hasErrors = sg.ErrorOccurred()
    if hasErrors:
        errors = sg.CreateStringArray()
        sg.GetErrorMessages(errors)
        errorCount = errors.GetItemCount()
        if errorCount > 0:
            print('Errors:')
            for errorIndex in range(errorCount):
                errorString = errors.GetItem(errorIndex)
                print(errorString)
            sg.ClearErrorMessages()
    else:
        print('No errors.')
    
    # Check if any warnings occurred. 
    hasWarnings = sg.WarningOccurred()
    if hasWarnings:
        warnings = sg.CreateStringArray()
        sg.GetWarningMessages(warnings)
        warningCount = warnings.GetItemCount()
        if warningCount > 0:
            print('Warnings:')
            for warningIndex in range(warningCount):
                warningString = warnings.GetItem(warningIndex)
                print(warningString)
            sg.ClearWarningMessages()
    else:
        print('No warnings.')
    
    # Error out if Simplygon has errors. 
    if hasErrors:
        raise Exception('Processing failed with an error')

def RunReduction(sg: Simplygon.ISimplygon):
    # Set the custom error handler to the Simplygon interface. 
    sg.SetErrorHandler(customErrorHandler)
    
    # Create the reduction pipeline. 
    sgReductionPipeline = sg.CreateReductionPipeline()
    
    # To be able to use the T-Junction remover, the welder has to be enabled so this will trigger an 
    # error. 
    sgRepairSettings = sgReductionPipeline.GetRepairSettings()
    sgRepairSettings.SetUseWelding( False )
    sgRepairSettings.SetUseTJunctionRemover( True )
    
    # Start the reduction pipeline and the faulty settings will cause an error.     
    print("Start the reduction pipeline and the faulty settings will cause an error.")
    sgReductionPipeline.RunSceneFromFile('../../../Assets/SimplygonMan/SimplygonMan.obj', 'Output.fbx', Simplygon.EPipelineRunMode_RunInNewProcess)
    
    # Check log for any warnings or errors.     
    print("Check log for any warnings or errors.")
    CheckLog(sg)

if __name__ == '__main__':
        sg = simplygon_loader.init_simplygon()
        if sg is None:
            exit(Simplygon.GetLastInitializationError())

        RunReduction(sg)

        sg = None
        gc.collect()