Remeshing processor

The RemeshingProcessor takes an input scene and replaces it with a lightweight proxy geometry that resembles the original, but does not share vertex data or parts of the original mesh data. The remeshed object is created and optimized for a certain on-screen pixel size - which means that holes and parts that are close to each other will have their gaps filled if the distance is below a pixel. At default settings, the proxy mesh is assumed to be viewed from the outside. Any interior mesh that cannot be seen is removed. The result is a very light-weight mesh that is highly optimized for real-time viewing, or to speed up off-line rendering of small objects. Simplygon is capable of remeshing arbitrary geometry, including non-manifold surfaces. The resulting geometry is guaranteed to be a closed 2-manifold

The remesher has fewer settings than the reducer, and in most cases the generated Mapping image is used to reproduce details on the geometry using baked textures. Most of the time, only the onScreenSize setting needs to be adjusted, apart from the mapping image settings to choose texture quality.

Remeshing processors settings

The settings contained in the remeshing settings control the parameters of the new mesh that is to be generated.

Following settings objects are available in remeshing processor:

• Geometry culling settings
• Mapping image settings
• Bone reduction settings
• Visibility settings

Example

This example shows how to use the Remeshing processor.

// Copyright (c) Microsoft Corporation. 
// Licensed under the MIT License. 

#include <string>
#include <stdlib.h>
#include <filesystem>
#include <future>
#include "SimplygonLoader.h"


Simplygon::spScene LoadScene(Simplygon::ISimplygon* sg, const char* path)
{
	// Create scene importer 
	Simplygon::spSceneImporter sgSceneImporter = sg->CreateSceneImporter();
	sgSceneImporter->SetImportFilePath(path);
	
	// Run scene importer. 
	auto importResult = sgSceneImporter->Run();
	if (Simplygon::Failed(importResult))
	{
		throw std::exception("Failed to load scene.");
	}
	Simplygon::spScene sgScene = sgSceneImporter->GetScene();
	return sgScene;
}

void SaveScene(Simplygon::ISimplygon* sg, Simplygon::spScene sgScene, const char* path)
{
	// Create scene exporter. 
	Simplygon::spSceneExporter sgSceneExporter = sg->CreateSceneExporter();
	std::string outputScenePath = std::string("output\\") + std::string("Remeshing") + std::string("_") + std::string(path);
	sgSceneExporter->SetExportFilePath(outputScenePath.c_str());
	sgSceneExporter->SetScene(sgScene);
	
	// Run scene exporter. 
	auto exportResult = sgSceneExporter->Run();
	if (Simplygon::Failed(exportResult))
	{
		throw std::exception("Failed to save scene.");
	}
}

void CheckLog(Simplygon::ISimplygon* sg)
{
	// Check if any errors occurred. 
	bool hasErrors = sg->ErrorOccurred();
	if (hasErrors)
	{
		Simplygon::spStringArray errors = sg->CreateStringArray();
		sg->GetErrorMessages(errors);
		auto errorCount = errors->GetItemCount();
		if (errorCount > 0)
		{
			printf("%s\n", "Errors:");
			for (auto errorIndex = 0U; errorIndex < errorCount; ++errorIndex)
			{
				Simplygon::spString errorString = errors->GetItem((int)errorIndex);
				printf("%s\n", errorString.c_str());
			}
			sg->ClearErrorMessages();
		}
	}
	else
	{
		printf("%s\n", "No errors.");
	}
	
	// Check if any warnings occurred. 
	bool hasWarnings = sg->WarningOccurred();
	if (hasWarnings)
	{
		Simplygon::spStringArray warnings = sg->CreateStringArray();
		sg->GetWarningMessages(warnings);
		auto warningCount = warnings->GetItemCount();
		if (warningCount > 0)
		{
			printf("%s\n", "Warnings:");
			for (auto warningIndex = 0U; warningIndex < warningCount; ++warningIndex)
			{
				Simplygon::spString warningString = warnings->GetItem((int)warningIndex);
				printf("%s\n", warningString.c_str());
			}
			sg->ClearWarningMessages();
		}
	}
	else
	{
		printf("%s\n", "No warnings.");
	}
}

void RunRemeshing(Simplygon::ISimplygon* sg)
{
	// Load scene to process. 	
	printf("%s\n", "Load scene to process.");
	Simplygon::spScene sgScene = LoadScene(sg, "../../../Assets/SimplygonMan/SimplygonMan.obj");
	
	// Create the remeshing processor. 
	Simplygon::spRemeshingProcessor sgRemeshingProcessor = sg->CreateRemeshingProcessor();
	sgRemeshingProcessor->SetScene( sgScene );
	Simplygon::spRemeshingSettings sgRemeshingSettings = sgRemeshingProcessor->GetRemeshingSettings();
	
	// Set on-screen size target for remeshing. 
	sgRemeshingSettings->SetOnScreenSize( 300 );
	
	// Start the remeshing process. 	
	printf("%s\n", "Start the remeshing process.");
	sgRemeshingProcessor->RunProcessing();
	
	// Replace original materials and textures from the scene with a new empty material, as the 
	// remeshed object has a new UV set.  
	sgScene->GetTextureTable()->Clear();
	sgScene->GetMaterialTable()->Clear();
	sgScene->GetMaterialTable()->AddMaterial( sg->CreateMaterial() );
	
	// Save processed scene. 	
	printf("%s\n", "Save processed scene.");
	SaveScene(sg, sgScene, "Output.fbx");
	
	// Check log for any warnings or errors. 	
	printf("%s\n", "Check log for any warnings or errors.");
	CheckLog(sg);
}

int main()
{
	Simplygon::ISimplygon* sg = NULL;
	Simplygon::EErrorCodes initval = Simplygon::Initialize( &sg );
	if( initval != Simplygon::EErrorCodes::NoError )
	{
		printf( "Failed to initialize Simplygon: ErrorCode(%d)", (int)initval );
		return int(initval);
	}

	RunRemeshing(sg);

	Simplygon::Deinitialize(sg);

	return 0;
}

// Copyright (c) Microsoft Corporation. 
// Licensed under the MIT License. 

using System;
using System.IO;
using System.Threading.Tasks;

public class Program
{
    static Simplygon.spScene LoadScene(Simplygon.ISimplygon sg, string path)
    {
        // Create scene importer 
        using Simplygon.spSceneImporter sgSceneImporter = sg.CreateSceneImporter();
        sgSceneImporter.SetImportFilePath(path);
        
        // Run scene importer. 
        var importResult = sgSceneImporter.Run();
        if (Simplygon.Simplygon.Failed(importResult))
        {
            throw new System.Exception("Failed to load scene.");
        }
        Simplygon.spScene sgScene = sgSceneImporter.GetScene();
        return sgScene;
    }
    static void SaveScene(Simplygon.ISimplygon sg, Simplygon.spScene sgScene, string path)
    {
        // Create scene exporter. 
        using Simplygon.spSceneExporter sgSceneExporter = sg.CreateSceneExporter();
        string outputScenePath = string.Join("", new string[] { "output\\", "Remeshing", "_", path });
        sgSceneExporter.SetExportFilePath(outputScenePath);
        sgSceneExporter.SetScene(sgScene);
        
        // Run scene exporter. 
        var exportResult = sgSceneExporter.Run();
        if (Simplygon.Simplygon.Failed(exportResult))
        {
            throw new System.Exception("Failed to save scene.");
        }
    }
    static void CheckLog(Simplygon.ISimplygon sg)
    {
        // Check if any errors occurred. 
        bool hasErrors = sg.ErrorOccurred();
        if (hasErrors)
        {
            Simplygon.spStringArray errors = sg.CreateStringArray();
            sg.GetErrorMessages(errors);
            var errorCount = errors.GetItemCount();
            if (errorCount > 0)
            {
                Console.WriteLine("Errors:");
                for (uint errorIndex = 0; errorIndex < errorCount; ++errorIndex)
                {
                    string errorString = errors.GetItem((int)errorIndex);
                    Console.WriteLine(errorString);
                }
                sg.ClearErrorMessages();
            }
        }
        else
        {
            Console.WriteLine("No errors.");
        }
        
        // Check if any warnings occurred. 
        bool hasWarnings = sg.WarningOccurred();
        if (hasWarnings)
        {
            Simplygon.spStringArray warnings = sg.CreateStringArray();
            sg.GetWarningMessages(warnings);
            var warningCount = warnings.GetItemCount();
            if (warningCount > 0)
            {
                Console.WriteLine("Warnings:");
                for (uint warningIndex = 0; warningIndex < warningCount; ++warningIndex)
                {
                    string warningString = warnings.GetItem((int)warningIndex);
                    Console.WriteLine(warningString);
                }
                sg.ClearWarningMessages();
            }
        }
        else
        {
            Console.WriteLine("No warnings.");
        }
    }
    static void RunRemeshing(Simplygon.ISimplygon sg)
    {
        // Load scene to process.         
        Console.WriteLine("Load scene to process.");
        Simplygon.spScene sgScene = LoadScene(sg, "../../../Assets/SimplygonMan/SimplygonMan.obj");
        
        // Create the remeshing processor. 
        using Simplygon.spRemeshingProcessor sgRemeshingProcessor = sg.CreateRemeshingProcessor();
        sgRemeshingProcessor.SetScene( sgScene );
        using Simplygon.spRemeshingSettings sgRemeshingSettings = sgRemeshingProcessor.GetRemeshingSettings();
        
        // Set on-screen size target for remeshing. 
        sgRemeshingSettings.SetOnScreenSize( 300 );
        
        // Start the remeshing process.         
        Console.WriteLine("Start the remeshing process.");
        sgRemeshingProcessor.RunProcessing();
        
        // Replace original materials and textures from the scene with a new empty material, as the 
        // remeshed object has a new UV set.  
        sgScene.GetTextureTable().Clear();
        sgScene.GetMaterialTable().Clear();
        sgScene.GetMaterialTable().AddMaterial( sg.CreateMaterial() );
        
        // Save processed scene.         
        Console.WriteLine("Save processed scene.");
        SaveScene(sg, sgScene, "Output.fbx");
        
        // Check log for any warnings or errors.         
        Console.WriteLine("Check log for any warnings or errors.");
        CheckLog(sg);
    }
    static int Main(string[] args)
    {
        using var sg = Simplygon.Loader.InitSimplygon(out var errorCode, out var errorMessage);
        if (errorCode != Simplygon.EErrorCodes.NoError)
        {
            Console.WriteLine( $"Failed to initialize Simplygon: ErrorCode({(int)errorCode}) {errorMessage}" );
            return (int)errorCode;
        }
        RunRemeshing(sg);

        return 0;
    }
}

# Copyright (c) Microsoft Corporation. 
# Licensed under the MIT License. 

import math
import os
import sys
import glob
import gc
import threading

from pathlib import Path
from simplygon10 import simplygon_loader
from simplygon10 import Simplygon


def LoadScene(sg: Simplygon.ISimplygon, path: str):
    # Create scene importer 
    sgSceneImporter = sg.CreateSceneImporter()
    sgSceneImporter.SetImportFilePath(path)
    
    # Run scene importer. 
    importResult = sgSceneImporter.Run()
    if Simplygon.Failed(importResult):
        raise Exception('Failed to load scene.')
    sgScene = sgSceneImporter.GetScene()
    return sgScene

def SaveScene(sg: Simplygon.ISimplygon, sgScene: Simplygon.spScene, path: str):
    # Create scene exporter. 
    sgSceneExporter = sg.CreateSceneExporter()
    outputScenePath = ''.join(['output\\', 'Remeshing', '_', path])
    sgSceneExporter.SetExportFilePath(outputScenePath)
    sgSceneExporter.SetScene(sgScene)
    
    # Run scene exporter. 
    exportResult = sgSceneExporter.Run()
    if Simplygon.Failed(exportResult):
        raise Exception('Failed to save scene.')

def CheckLog(sg: Simplygon.ISimplygon):
    # Check if any errors occurred. 
    hasErrors = sg.ErrorOccurred()
    if hasErrors:
        errors = sg.CreateStringArray()
        sg.GetErrorMessages(errors)
        errorCount = errors.GetItemCount()
        if errorCount > 0:
            print('Errors:')
            for errorIndex in range(errorCount):
                errorString = errors.GetItem(errorIndex)
                print(errorString)
            sg.ClearErrorMessages()
    else:
        print('No errors.')
    
    # Check if any warnings occurred. 
    hasWarnings = sg.WarningOccurred()
    if hasWarnings:
        warnings = sg.CreateStringArray()
        sg.GetWarningMessages(warnings)
        warningCount = warnings.GetItemCount()
        if warningCount > 0:
            print('Warnings:')
            for warningIndex in range(warningCount):
                warningString = warnings.GetItem(warningIndex)
                print(warningString)
            sg.ClearWarningMessages()
    else:
        print('No warnings.')

def RunRemeshing(sg: Simplygon.ISimplygon):
    # Load scene to process.     
    print("Load scene to process.")
    sgScene = LoadScene(sg, '../../../Assets/SimplygonMan/SimplygonMan.obj')
    
    # Create the remeshing processor. 
    sgRemeshingProcessor = sg.CreateRemeshingProcessor()
    sgRemeshingProcessor.SetScene( sgScene )
    sgRemeshingSettings = sgRemeshingProcessor.GetRemeshingSettings()
    
    # Set on-screen size target for remeshing. 
    sgRemeshingSettings.SetOnScreenSize( 300 )
    
    # Start the remeshing process.     
    print("Start the remeshing process.")
    sgRemeshingProcessor.RunProcessing()
    
    # Replace original materials and textures from the scene with a new empty material, as the 
    # remeshed object has a new UV set.  
    sgScene.GetTextureTable().Clear()
    sgScene.GetMaterialTable().Clear()
    sgScene.GetMaterialTable().AddMaterial( sg.CreateMaterial() )
    
    # Save processed scene.     
    print("Save processed scene.")
    SaveScene(sg, sgScene, 'Output.fbx')
    
    # Check log for any warnings or errors.     
    print("Check log for any warnings or errors.")
    CheckLog(sg)

if __name__ == '__main__':
        sg = simplygon_loader.init_simplygon()
        if sg is None:
            exit(Simplygon.GetLastInitializationError())

        RunRemeshing(sg)

        sg = None
        gc.collect()